Why is the rear wiper not turning on?
With the front wipers tuned on and in operation the rear wiper can be set to operate automatically at predetermined intervals – with the rear wiper turned off via the stalk. Given that you’ve already stated that the position of the stalk is not changing the operation of the rear wiper then you almost certainly have a fault.
How does the front wiper work on a Land Rover?
Pull and release to operate the front washers and wipers. After a few seconds, a drip wipe clears any residual washer fluid from the windshield. If more washer fluid is required, pull and hold the wash/wiper control position. The front wipers do not operate while the hood is open. INT: Rear wiper intermittent operation.
How does the rear window wash and wipe work?
Rear window wash and wipe: Press and release to operate the rear washer and wiper. The wiper operates in a set cycle to minimize drips when the button is released. If more washer fluid is required, push and hold the button. When reverse ( R) gear is selected and the front wipers are operating, the rear wiper activates.
Do you lift the wiper by the blade or by the arm?
Remove any snow, ice or frost from the windshield, around the wiper arms and blades, and from the cowl area before operating the wipers. To avoid damage to the wiper blade, do not lift the wiper by the wiper blade. Always lift the wiper by the wiper arm.
With the front wipers tuned on and in operation the rear wiper can be set to operate automatically at predetermined intervals – with the rear wiper turned off via the stalk. Given that you’ve already stated that the position of the stalk is not changing the operation of the rear wiper then you almost certainly have a fault.
Why is the rear wiper always on in my Yeti?
If the rear wiper is operating the same, regardless of it is turned on or off via the stalk would very much suggest the stalk is at fault, rather than the motor. There are various settings that can be turned on or off that can cause unexpected operation of the rear wiper.
Where is the relay on a windshield wiper?
Faulty Relay: Every windshield wiper system has an internal electric switch mechanism called a relay. Automotive relays are small plastic boxes that plug into a particular location in a covered panel underneath the hood near a handful of other relays.
What are the parts of a windshield wiper?
Modern windshield wiper assemblies have several parts: the wiper switch, electronic wiper motor, linkage assembly, two wiper arms and washer fluid tank. When you flip the wiper switch on, it activates a small electric motor, which spins and moves the linkage assembly.