Why does my Toyota Sienna door lock not work?
On my 2002 Sienna the door locks won’t work with the remote or the inside buttons. The dome lights are also out. I’ve checked all the fuses and all are good. I looked on a mechanic friend’s computer program and it pointed to BCM (integration relay). Anyone have experience with this problem and have an answer for me.
How does the dome light work on a Toyota?
Mine is doing the same thing. Dome light works when you hit the switch by the rearview mirror, but do not come on when you open any of the doors. The red door ajar light comes on in the dash when you manually push the switch in on the doorjamb, but no dome light. Fuses are good, bulb is good.
Why does my dome light not come on?
It’s in the door jamb. The switch in the door jam works since the second and third row dome lights come on. It is just the front personal lights that don’t come on. My rheostat switch doesn’t turn on the dome light anymore. The brightness still works. It doesn’t bother me as much since I have the map lights in the rearview mirror.
Why does my Sienna Le not open or close?
So out of the blue, our 06 Sienna LE’s passenger side power door stopped opening/closing using either of the interior buttons. It pops and tries to open/close, but it acts like it’s totally stuck. BUT, when using the handles, both interior and exterior handles, the door powers open/closed flawlessly.
How does the power door open on a Toyota?
• The power slide door operates only when the power slide door main switch is ON (switch free: orange paint on the top of the switch appears). The power slide door ECU RH controls the power slide door RH, which activates the slide door motor to open / close the slide door.
Is there a power door switch on a Toyota Sienna?
I’m not familiar with the 2002 (1st Generation) Sienna, but in the 2004 (2nd Generation) Sienna, there is an “on/off” switch that controls the power to the power doors (if so equipped). This power switch is different and separate from the button (s) that open (s)/close (s) the door.
How much does a 2001 Sienna Le cost?
My 2001 Sienna LE right side power door quit working and was going to cost about $1200 for a new drive motor and ECU. I decided to remove the drive motor and cable to convert it to a manual door. It slides just as easy as the manual left side door now. It wasn’t too difficult to do.
How to program keyless entry key fob on Toyota Sienna?
This video will show you how to reprogram your keyless entry remote fob on 2006, 2007, 2008, 2009, Toyota sienna . This will take abt 1 minute to program toyota remote fob. 1 Get in the car leave the drivers door open and unlocked make shore no key in ignition. 4 Put the key in ignition once and pull it out.
How to program the Toyota remote keyless entry system?
How to program or initialize the Toyota remote keyless entry system step by step instructions: 1 Get in the car leave the drivers door open and unlocked make shore no key in ignition. 2 Put the key in the ignition and take it out twice within 5 sec. 4 Put the key in ignition once and pull it out.
Where was the 2002 Toyota Sienna last serviced?
1st owner drove an estimated 10,007 miles/year • 2nd owner drove an estimated 20,002 miles/year • 3rd owner drove an estimated 0 miles/year. Last serviced at 270,082 miles in Lakewood, CO on 10/01/20 • Vehicle serviced. Mileage: 282,226 miles Body Type: Minivan Color: Blue Engine: 6 Cyl 3.0 L No accident or damage reported to CARFAX.
When does the dome light come on on a Toyota?
Mine is doing the same thing. Dome light works when you hit the switch by the rearview mirror, but do not come on when you open any of the doors. The red door ajar light comes on in the dash when you manually push the switch in on the doorjamb, but no dome light.
Why does the dome light not come on when you open the door?
The lights work fine when you punch the button but they don’t come on when the door opens. The back dome light does come on when the door opens so it must be something with the front dome lights. Any thoughts from any one?
How do you turn off the remote lock on a Toyota?
With the car off, push it in, then out. Turn the key on, then turn it off. Press the button in and out again three times (six pushes). You’ll hear a beep. If you hear two beeps, that’s it toggling back off again, so you’re aiming for just one. Hope this helps!
How do I get my Toyota remote to chirp?
My question is how do I get my remote that came with the car to chirp that the doors are closed and opened when I click the buttons. The only thing that happens is the lights flash when I click the lock or unlock button. Can this be done on a Corolla? I know the Camry and Highlander have the chirp. Thanks for your feedback.
Where are the fuses located in a Toyota Sienna?
Here you will find fuse box diagrams of Toyota Sienna 1998, 1999, 2000, 2001, 2002 and 2003, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout). Cigar lighter (power outlet) fuses in the Toyota Sienna are the fuse “PWR-OUTLET” and “CIG” in the Instrument panel fuse box.
When did the Toyota Sienna xl10 come out?
In this article, we consider the first-generation Toyota Sienna (XL10), produced from 1998 to 2003. Here you will find fuse box diagrams of Toyota Sienna 1998, 1999, 2000, 2001, 2002 and 2003, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout).
How to reset the power door battery on a Toyota Sienna?
Step 1 Press the sliding door control button on the Sienna’s dashboard so that the red line on the button is illuminated. Close the sliding doors. Raise the hood of the van, and disconnect the negative (“-“) battery cable with a wrench. Wait 3 to 5 minutes, then reconnect the cable.