Why are my lights not working on my Harley?
your bike will not start because you have no IGNITION power. the ignition power runs the starter relay, coil and ignition module. the power source for lights and ignition are 2 separate switch contacts. your lights come off the keyswitch relay.
What does it mean when your car won’t start but Lights Come On?
Analyzing and diagnosing the broken fuse’s location can help you prevent the “car won’t start but lights on” scenario in your vehicle. The signs of a faulty fuse are that your accessories will lose power, the damaged fuse will appear broken or disconnected, or circuits start to overload.
What causes a bike to not start with no lights?
your lighting is not wired correctly, or has major issues, or a bad ground. your spot lamps are powered from the headlight LOW beam circuit. they can’t be ON if you have no LIGHTS power. your bike will not start because you have no IGNITION power. the ignition power runs the starter relay, coil and ignition module.
What should I do if my Harley won’t start?
Everything works perfectly – Lights, hear the fuel pump kick on, signal, brakes, switches appear fine and I changed the gas to highest just in case and nothing. I checked spark by pulling a plug and starting while on the cyl. and no spark. Put a new coil in it and nothing. Cranks great and all is appearing to be fine but no fire/start?
https://www.youtube.com/watch?v=pELl5uLEkHQ
Why does my Harley Davidson bike not start?
your bike will not start because you have no IGNITION power. the ignition power runs the starter relay, coil and ignition module. the power source for lights and ignition are 2 separate switch contacts.
Do you need a key to start a Harley Davidson?
All Harleys, and some other bikes from other manufacturers, have always been ‘keyless’. You use the key only to unlock the ignition- once unlocked, you remove the key and just turn the ignition switch on and off without needing the key.
Is there a headlight on a Harley Davidson?
No headlight, light bar but front fender lights up . speedo lights up, not fuel gauge.wont crank, wont make a sound. battery checked out good. bike just wont crank . not a sound. Also no green naural light. I pull in the clutch and still grt nothin’.
your bike will not start because you have no IGNITION power. the ignition power runs the starter relay, coil and ignition module. the power source for lights and ignition are 2 separate switch contacts. your lights come off the keyswitch relay.
All Harleys, and some other bikes from other manufacturers, have always been ‘keyless’. You use the key only to unlock the ignition- once unlocked, you remove the key and just turn the ignition switch on and off without needing the key.
your bike will not start because you have no IGNITION power. the ignition power runs the starter relay, coil and ignition module. the power source for lights and ignition are 2 separate switch contacts.
How does a keyless Harley Davidson motorcycle work?
When you turn the switch and hit the starter button, the bike sends out a low-power signal, and if the key fob does not ‘answer’ the computer chip leaves the ignition disabled. That way no one can start your bike when you are not around even if you leave the ignition unlocked.
What to do if no power to ignition or headlights?
And its the only thing left on the checklist that is in line to power the solenoid and headlights. Purchased an aftermarket ignition and spliced it in place of the old ignition switch. A starter relay was inexpensive so I purchased one just in case. I put the old starter relay back into the plug.
No headlight, light bar but front fender lights up . speedo lights up, not fuel gauge.wont crank, wont make a sound. battery checked out good. bike just wont crank . not a sound. Also no green naural light. I pull in the clutch and still grt nothin’.
And its the only thing left on the checklist that is in line to power the solenoid and headlights. Purchased an aftermarket ignition and spliced it in place of the old ignition switch. A starter relay was inexpensive so I purchased one just in case. I put the old starter relay back into the plug.
How to start a Harley Davidson that wont start?
Insert 1 wire into the female terminal that would be #30 in the fuse panel socket. Insert the other WIRE (NOT END of 1st wire) into #87 of the fuse panel socket. 6) Make SURE bike is in NEUTRAL. 7) Turn on ignition ON and Kill switch to run. When you touch both of your installed wires together DOES bike crank./start? Click to expand…
Is there a problem with the ignition on a Harley Davidson?
Thanks george,but its none of the above you wrote,My Harley is garage,I finally found out it was a contact inside ignition that had broke away due to flat keys riggling about because of vibration of engine,all 2015 wide glides also have same problem and have been recalled,over 3000 bikes.
Why is my starter not working on my Harley?
That black wire with the red tracer should be sending 12v to the starter relay. Be sure that this wire is not damaged or pinched anywhere in its travel. This will be more common when wires have been routed through the bars, or switch housings/switches have been changed. Don’t forget to use your multimeter inside the switch housings too.