Where is the oil filter on a Ford Edge?
The oil filter is located in front of the oil pan. Slide the used oil catch container to just below the oil drain bolt. Loosen the oil drain bolt by turning it in the counterclockwise direction with the 15mm socket and a 3/8″ drive ratchet. Be careful when you remove the oil drain bolt.
Does Ford Edge use synthetic oil?
For the 2018 Ford Edge with the 2.0 L 4Cylinder and 2.7 L V6 it needS5W-30 Synthetic Motor Oil and for the 3.5 L V6 engine it needS5W-20 Synthetic. Oil is very important because it will help to keep the engine clean and running smoothly.
Does a 2011 Ford Edge use synthetic oil?
SYNTEC Synthetic Motor Oil 5W-20 5 Quart.
What kind of oil does a Ford Edge have?
Federal standards Tier II/Bin 5, LEV II California standards ULEV II Oil capacity 5.5 quarts, with filter Recommended oil GF4, 5W-20 DRIVETRAIN Layout FWD (optional AWD) TRANSMISSION Standard Six-speed automatic (SE) Six-speed SelectShift Automatic™(SEL, Limited) 2011 FORD EDGE TECHNICAL SPECIFICATIONS Gear ratios
How to change oil in Ford Edge Duratec 35?
Before screwing on the new oil filter, place a thin bead of new oil on the rubber o-ring at the top of the filter. This allows it to create a better seal and makes it easier to twist if off during the next oil change. Twist on the filter to just past hand tight. Do not use an oil filter wrench to tighten the filter as it may cause damage.
Where is the oil drain on a Ford Edge?
If you need more clearance, raise up the passenger side with a floor jack and secure it with jack stands. The 15mm oil drain bolt and the oil filter are located near the rear of the engine’s underside closer to the passenger side.
What kind of oil filter does Ford use?
Ford oil filters deliver the quality performance you need when working under the hood of your Ford and Lincoln vehicles. These oil filters are the only ones tested and recommended by Ford Motor Company.