Where can I find the Suzuki Ozark service manual?
1-6 GENERAL INFORMATION INFORMATION LABELS APPLIED SPECIFICATION LABEL or PLATE NAME E-03 E-17 E-24 E-28 E-33 — — Certification plate — — — — Information label — — Gearshift pattern label — — — Gearshift pattern label Tire air pressure label —…
How often should I change the spark plug on my Suzuki Ozark?
If the spark plug gap is out of specification, adjust the gap. Standard Spark plug gap: 0.6 – 0.7 mm (0.024 – 0.028 in) … 2-8 PERIODIC MAINTENANCE THROTTLE CABLE PLAY Inspect initially at 1 month and every 3 months there- after. Adjust the throttle cable play A as follows. • Loosen the locknut 1 of the throttle cable.
How to check brake pads on Suzuki Ozark?
BRAKE PADS • Remove the front wheels. (7-10) The extent of brake pad wear can be checked by observing the limit line 1 on the side of brake pads. When the wear reaches the limit line, replace the pads with new ones. PERIODIC MAINTENANCE 2-13 • Turn the adjuster 1 until the play A is 20 – 30 mm (0.8 – 1.2 in).
What kind of oil do you put in a Suzuki Ozark?
ENGINE OIL (For USA) SUZUKI recommends the use of SUZUKI PERFORMANCE 4 MOTOR OIL or oils that meet API service classifications SF or SG and that have a viscosity rating of SAE 10W-40. If engine oil with a rating of SAE 10W-40 is not available, select an alter- native according to the chart.
1-6 GENERAL INFORMATION INFORMATION LABELS APPLIED SPECIFICATION LABEL or PLATE NAME E-03 E-17 E-24 E-28 E-33 — — Certification plate — — — — Information label — — Gearshift pattern label — — — Gearshift pattern label Tire air pressure label —…
When did the Suzuki Ozark 250 come out?
Sporty, nimble, and surefooted – these are only some of the laudable qualities of the Suzuki Ozark 250. The 4×4, introduced in 2003, had a design and characteristics reminiscent of the trailblazers that created the ATV boom in the early ’80s.
What should spark plug gap be on Suzuki Ozark?
PERIODIC MAINTENANCE 2-7 SPARK PLUG GAP Measure the spark plug gap using a thickness gauge. If the spark plug gap is out of specification, adjust the gap. Standard Spark plug gap: 0.6 – 0.7 mm (0.024 – 0.028 in) …
BRAKE PADS • Remove the front wheels. (7-10) The extent of brake pad wear can be checked by observing the limit line 1 on the side of brake pads. When the wear reaches the limit line, replace the pads with new ones. PERIODIC MAINTENANCE 2-13 • Turn the adjuster 1 until the play A is 20 – 30 mm (0.8 – 1.2 in).