When does the reqd light come on in a 2006 Sienna?

When does the reqd light come on in a 2006 Sienna?

Sometimes, after changing the oil in your 2006 Sienna, you may notice that the MAIN REQD light is still on. The light, which indicates when you need an oil change, typically comes on approximately every 5,000 to 7,500 miles. To turn the light off, you need to reset it by following a few easy steps. Step 1

How to reset Toyota Sienna maintenance required light?

Hold Knob For At Least 5 Seconds Until “000000” Is Displayed. Then Turn The Ignition OFF. Turn The Ignition ON. Don’t Start The Engine. Then Turn The IGNITION To OFF. Press And Hold ODO/TRIP BUTTON And Turn Ignition To The “RUN” Position. Hold Knob For At Least 5 Seconds Until “RESETTING MAINTENANCE DATA /”000000 ” Is Displayed.

When do you reset the maintenance required light on a Toyota?

Once your Toyota has been serviced, the “MAINTENANCE REQUIRED” light will need to be reset. Some servicers will neglect to do this, which can lead to premature and unnecessary service light triggers. With only a few simple steps, you can learn how to do it yourself: Step 1: Insert the key into the ignition and turn the car to the “ON” position.

How to turn off the maintenance required light?

The maintenance required light should begin flashing on your dashboard. Continue to keep the button pressed until the light goes away from your dashboard. Pressing the reset button for more than 20 seconds is necessary for this technique to be successful.

How to reset the Toyota maintenance required light?

Turn the Vehicle Off and Press the Trip Meter Reset Button Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. Hold this button for a while. For some models, this is the button used to switch from the odometer reading to the other two trip meters. 3.

Why does my Toyota maintenance light keep flashing?

The Toyota maintenance light relies entirely on the odometer counting those 5,000 miles, so it has no way of detecting if you changed the oil in the meantime. That’s why this light can become annoying if you just changed your oil and it flashes on your dashboard reminding you to do it.