When did I replace the battery on my Street Glide?

I have a 2014 Street Glide Special with about 40k miles. I replace the main battery in February and then last week I took the bike for a ride. After stopping for a drink, the bike would not start.

Is there a problem with my Street Glide radio?

No problem accept the amp blocks my antenna reception. I use Bluetooth from phone or an SD card anyway. If your amp isn’t set right you could be blowing the speakers. Hertz are a good replacement for the fairing. Your symptoms are typical of the factory H-K radio failing.

What do you need to know about Street Glide?

Names of Members and Loved ones who have passed away. May they rest in peace! Please read some basic rules. Posts General Streetglide Discussions Here! Post general news and items here! Post you CVO Streetglides here! Post you information here. Colors, style and features. Post Features and Photos! Rear Shock Recomendations for…

When did the Street Glide 110 come out?

2012 sg. Post links to Motorcycle Videos here! 2010 Street Glide 110 Build… For all our Friends North of the Border! Enjoy! Ontario Personalized Licence… Discussion of things not related to your bike. But be for-warned political statements may be deleted if crude, obnoxious or racist! Post your used Streetglide equipment for sale here. Free!

What to do when your Harley Davidson won’t start?

Try neutral with clutch pulled in. Also battery connections , solenoid wire. The security system lights only flash after I turn off the bike. I have the bike in neutral and I even tried pulling in the clutch a couple of times. I checked the wire to the solenoid and it had power.

What’s the voltage on a Harley Davidson starter?

I check the voltage at the kill switch and get 12.3 from the black and white wire that goes to the kill switch and the start button. But, I only get 9.2 volts from the black and red wire from the start switch to the start relay. All the fuses are good and there are 12 volts to the starter and the solenoid.

Why is my Harley Davidson Road King not starting?

If you have a Tachometer, disconnect it. A bad tach can interrupt proper coil function. i have problem error code U1301 in Harley Davidson Road King 2009 and test everything not starts . I have a 92 FXRSP, I recently replaced my switches and I had a new battery.

I have a 2014 Street Glide Special with about 40k miles. I replace the main battery in February and then last week I took the bike for a ride. After stopping for a drink, the bike would not start.

What to do if your Dyna Glide won’t start?

Typical Dyna Glide fuse box layout. It usually a good idea to open up the right handlebar switch assembly and check for corrosion on the starter and run switches. While it is not a very common problem, checking for a faulty starter switch is one last area to inspect before setting your sights on the starter assembly itself. Figure 6.

Where is the starter on a Harley Davidson Dyna Glide?

Perhaps the easiest place to begin is at the starter solenoid on the right side of the motorcycle. Pull back the protective rubber boot and ensure the positive battery cable (yellow arrow) is securely tightened to the solenoid terminal.

When did the new Electra Glide bike come out?

The 2009 edition of this bike addressed many issues and concerns about the previous generations of Electra Glide, adding a larger fuel tank and rerouting the exhaust system that was heating up so many of the earlier model riders’ thighs, according to Motorcycle.

What happens if you hit the starter button and nothing happens?

Battery good, lights , horn turn signal works. Fuel pump runs , hit starter and nothing, lights do not dim and no sound at all. All fuses O.K. starter relay maybe ? any advice ? 06 roadking by the way.

How to disarm the Smart Security system on a Harley Davidson?

Also, with the battery disconnected in the fob I can keep the fob in one of the bike’s bags without worrying that it’s deactivated the alarm should someone get any ideas of rolling away with it. Every once in a while I use the PIN to disarm the system to help me remember what the PIN is.

How to reset the security code on a Harley Davidson touring?

This article will show you how you can reset the security code, or override the fob on your Harley Davidson Touring. Turn the ignition switch located on the gas tank to “off,” and then turn it to “on.” Figure 1. Turn ignition switch. Press both turn signal switches together and keep them pressed.

How do you turn off the ignition on a Harley Davidson?

Turn the ignition switch on-off-on-off-on quickly. With a proximity fob system, press the left turn signal switch three times and the right turn signal switch once. The blinkers will flash and the PIN should appear in the odometer window.

Is the factory security system on a Harley Davidson?

Does the bike have the factory security system. Do the flashes start to blink on/off when you try to start it. It the answer is “No” to both questions perform this test. 1) Place Bike in NEUTRAL. 2) Remove the fuse cover and locate the start Relay.

Can a security FOB be changed on a new Harley Davidson?

If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case. If your bike has security, as well as the fob it can have a backup PIN. It will be a five-digit number that your local dealer can change or set for you using the Digital Tech system.

Can a battery be left in a Harley?

“Harley suggests leaving the Battery Tender connected if the battery is left in the bike during storage,” adds Shanneba. “If the battery is out of the bike, they suggest charging the battery every month.

Is it OK to forget the battery tender on a Harley?

Battery Tender claims you can set it and forget it. But is that really true? Unless you’re lucky enough to live somewhere where temperatures remain above freezing all year, you’re likely getting ready to store your Harley for its winter nap. It’s a sad time of year, really, but it’s a necessary one.

How long does a fob battery last on a Harley Davidson?

Lasted me from August 2012 until March of 2016. But luckily I had done what Schmidty said and programmed a PIN so I could still ride the bike home take my truck to get new fob batteries. Program a personal PIN into the TSSM so you can arm and disarm the security without the FOB.

What kind of bike is the 2014 Electra Glide?

2014 HARLEY-DAVIDSON Electra Glide Ultra Limited FLHTK, 2014 Ultra Limited w/ 61k Miles dressed in Daytona Blue Pearl, 103ci, 6-Speed, LA Chopper Dual… “A Beautiful Bike… “A Beautiful Bike… 2014 Harley Davidson Ultra Limited, 22,464 mile . 20,000 mile Total Full Service at HD. Totally Loaded with everything. Garage Kept and the Bi…

Is the Electra Glide Ultra limited available in Florida?

FINANCING AVAILABLE IN FLORIDA 2014 HARLEY-DAVIDSON FLHTK ELECTRA GLIDE ULTRA LIMITED This touring bike has some miles but look at how well it ha… 2014 Harley-Davidson® FLHTK – Electra Glide® Ultra Limited, 2014 Harley-Davidson® Electra Glide® Ultra Limited The farther you go on a motorcycle,…

How many miles does an Electra Glide have?

2014 Harley-Davidson Electra Glide Ultra Limited FLHTK , This is a 2014 Harley-Davidson FLHTK in Charcoal Pearl/ Vivid Black. It has 38656 MILES on it…

Why is my Harley Davidson Ultra Classic not starting?

I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.

Why does my Harley Davidson not have power?

I checked the wire to the solenoid and it had power. Almost certainly it’s a battery problem, either low charge or bad cable connection. Charge the battery on a good bench charger, not a Tender, but a real charger. Remove and reconnect both battery cables making sure they are tight and connections are clean.

Why is the start button not working on my Harley Davidson?

If you did NOT read 12 volts, you would have to go back to the TSSM and hot wire (bypass it) in order to determine where the problem was. Also testing the start button would be something to check also. The key point to remember is that the “Start Relay Control” comes from the TSSM.

Why does my Harley Davidson bike not start?

When I turn on the bike and put it in the run position, the fuel pump kicks on, but when I push the start switch the bike doesn’t even try to turn over. The battery is fully charged and the fuel pump turns on when I push the switch, but nothing else happens.

How to start a bike without a fob?

Here is how to use the code you jus entered to start your bike without the Fob present!! 1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window. 2. Enter the first digit of your PIN (a) by pressing the left turn signal switch (a) times.

How to turn off the FOB on a Harley Davidson?

Here’s how to do it!! 1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual. 2. With an assigned FOB present, turn IGN key ON – OFF – ON – OFF – ON 3. Press Left turn signal switch 2 times. 4. Press Right turn signal switch one time and release.

Why does the battery shunt the voltage on Street Glide?

Thanks again for such a great site! Yes, once the battery is fully charged the regulator will shunt the voltage it does this for 2 reasons 1 the battery does not need the voltage 2 by shunting it gets rid of heat to protect itself Blue Wide Glide, Fisherking and zoob2 like this.

How can I check the voltage on my Street Glide?

Pull the headlight out and hook it to a battery charger. Clamp the negative leed and touch the positive leed and if it’s good it will light up. If it lights up it will do so on low beam. You need to check your charging/ output voltage with a Multimeter-as already mentioned by Bowden.

How do you replace a starter on a Harley Davidson?

Add a drop of blue Loctite to the threads of the starter mounting bolts. Insert the bolts into the starter and thread into the inner primary. Torque bolts to 25-27 foot-pounds. Remove cloth and reinstall oil filler cap. Slip battery positive cable ring over stud and install nut.

What kind of bike is a Harley Davidson Electra Glide?

The 2012 MY Harley Davidson FLHTC Electra Glide Classic is mainly addressed to riders who want a modern touring machine, with a high level of rider and passenger comfort, but who also have a soft spot for classic cruiser design.

What kind of trim does a 2015 Electra Glide have?

The 2015 MY Harley Davidson Electra Glide Ultra Classic features the “Rushmore project” trim, including enhancements designed to maximize the touring capabilities of all MoCo machines, improving the brakes, the headlamps, the taillamp and adding a stiffer front fork.

What kind of engine does a 1989 Harley Davidson Electra Glide have?

The 1989 MY Harley Davidson FLHTC Electra Glide Classic boasts a maximum power output of 50 horsepower and 94 Nm of torque from its four-stroke, air-cooled, 1337cc, 45-degree V-Twin powerhouse, that was mated to a five-speed manual transmission with a belt final drive. Standard features include a fork-mounted,…

Why is my Harley Davidson Dyna Glide not starting?

If your battery voltage and connections are in good condition, but your engine is still refusing to turn over, the problem may be in the starter circuit. Perhaps the easiest place to begin is at the starter solenoid on the right side of the motorcycle.

How to start a Harley Davidson that wont start?

Insert 1 wire into the female terminal that would be #30 in the fuse panel socket. Insert the other WIRE (NOT END of 1st wire) into #87 of the fuse panel socket. 6) Make SURE bike is in NEUTRAL. 7) Turn on ignition ON and Kill switch to run. When you touch both of your installed wires together DOES bike crank./start? Click to expand…

What to do if your Harley won’t start?

The Harley service manual suggests to check the electrical connections at the ECM and CKP, as well as check the resistance of the ignition coil before replacing the CKP sensor. That being said, a large number of Dyna owners who have had trouble starting their bikes reported that replacing the CKP sensor immediately cured the problem.

What do you need to start a Harley Davidson?

The bike has to have a signal from the key fob before it will allow the bike to start. The TSSM is the – turn signal security module ( Japan & Korean markets only) I asked the dealer is they could test the ECM and they said yes if it on the bike.

What does no start on Delphi fuel injection mean?

If you have a no start condition on your motorcycle with Delphi fuel injection. The problem occurs one time and does not return, so is difficult to diagnose. When the condition occurs, a P1010 code – missing password, is normally set. There have been a few reports of a P1009 code – incorrect password also. It appears the turn signal

Where is the reset button on a Harley Davidson?

Before you start the reset procedure, be sure your run/stop switch is turned on. The run/stop switch is located on the right side of your handlebar. Turn it to run, then proceed. Figure 1. Run/stop switch. With the run/stop switch on, turn the ignition on and then off three times.

How to reset the security system on a Harley Davidson touring?

With a proximity fob system, press the left turn signal switch three times and the right turn signal switch once. The blinkers will flash and the PIN should appear in the odometer window. With a push button fob, press the left turn signal three times, then the key fob twice, and the PIN will appear.

Where is the run / stop switch on a Harley Davidson?

The run/stop switch is located on the right side of your handlebar. Turn it to run, then proceed. Figure 1. Run/stop switch. With the run/stop switch on, turn the ignition on and then off three times. Don’t do it too quickly; in fact, it’s best you leave a second or two in between: turn it on, wait, off, wait, on, wait, off, wait on, wait, off.

How to change the battery on a Harley Davidson?

Click…Click…Click is never a good sound when starting your bike, especially on a beautiful day to go ride. Not to worry, I am here to help ya with changing your battery out. What you’ll need is some patience and tools: New Battery (of course), take your old one to an auto parts store and exchange it for a new one, about $80ish. Loading…

How do you reset the idle speed on a Harley Davidson?

To keep this from occurring you can reset the idle by turning on the ignition switch until the fuel pump cycles on and off, then turning off the ignition. Repeat this three times and the idle speed will be reset to normal, 1,000 rpm.

What to do if your Harley Davidson battery is dead?

If your Harley’sbattery is dead then you have come to the right place! This motorcycle battery finder will help you select the right battery for your Harley.

How long does a Harley Davidson battery last?

Correctly maintained, a motorcycle battery should give you 48 months of use. However if you don’t ever charge it and rarely use the bike, it could be dead within 6 months.

Why is the radio not working on my Street Glide?

I replaced the battery on my wife’s 2010 Street Glide. Now the radio won’t come on. Any suggestions would be appreciated. A: If you have no power to your radio, check for a blown fuse 1st.

How often does a Harley Davidson battery drain?

Bike is under extended Warranty and they are saying SORRY we can’t fix it! Then they said to get a trickle charger, but I can’t don’t have access to plug it in! It discharges randomly, sometimes its 2 times in a week, sometimes 3 weeks it will stay charged.

Why does my 84 flhtc battery keep draining?

I believe I have a battery drain. Just purchased a new 350 cold crank amps and after a proper initial charge, and run, the next day the battery did not have enough juice to turn over. My 84 FLHTC has the EVO motor, and while it runs and sounds like a dream, starting it has become a issue. Any ideas?

Is the battery on my Harley Davidson under warranty?

Bike is under extended Warranty and they are saying SORRY we can’t fix it! Then they said to get a trickle charger, but I can’t don’t have access to plug it in!

What does it mean if your Harley is not starting?

Harley Wobble – Read More 2. Harley Not Starting – Read More 3. Harley Started to Misfire – Read More 4. Oil Dripping from Harley Air […] […] Harley Wobble – Read More 2. Harley Not Starting – Read More 3. Harley Started to Misfire – Read More 4.

What did the battery light come on on my Harley Davidson?

Rode about 70 miles yesterday. Everything was fine as usual. Stopped for gas. She fired right up. As soon as we hit the road the battery and engine light came on. Pulled into the next gas station and shut her down. Waited a few minutes and she started right back up but lights still on. Headed home.

What to do if your Charger light goes out?

Step 1: Start the engine. After all of these steps have been taken, the engine needs to be started up again to see if the charging warning light is still on. If the light goes out after starting the engine, check the charging system for any other problems.

What to do when your battery light comes on while driving?

If the battery light comes on while the engine is running and the vehicle is being driven, this indicates a problem with the charging system. Step 1: Turn off everything that draws power.

Can a car have lights but no starter?

As 2002c230 notes, you can have lights but no starter. Call mb roadside assist (I think you may still have access, they just changed the rules) and they’ll come out and try to jump it properly.

Why does my car light not turn on?

The starter requires a min. amount of voltage to engage. The radio, light, etc, will all work still. More than likely your battery is low. Has it been replaced before?

What should I do if my motorcycle battery wont start?

If you don’t see these symptoms or are otherwise unsure what to look for, the first step is ensuring that the battery is operational and providing the maximum voltage. To confirm your battery is still good, you should visually inspect it, check the voltage, and load test the battery. A visual battery inspection should involve:

Why does my motorcycle not start with the side stand down?

Newer bikes (and some older ones) may refuse to start with the side stand down. Along with all the other high-tech sensors that are on board, your motorcycle might have a built-in code that keeps the ignition from starting if your kickstand is engaged.

What should the voltage be on a Harley Davidson Dyna Glide?

Use a voltmeter to measure the available voltage at the battery. A battery that is 100% charged will have approximately 12.6 volts, whereas a battery with a 0% charge will read 11.8 volts or lower. If your battery is low, charge the battery on a setting no higher than five amps for a few hours.

What causes a Harley Davidson to not turn over?

If the bike does not turn over, the issue can be battery, starter, starter relay. If turns over, but no start, determine if the issue is electrical or fuel related. Check for spark.

How to reset the turn signal on a Harley Davidson Dyna Glide?

Press the reset button again and the display will read “PSSPt.” Press the reset button a few times until the first “S” is flashing, then press and hold it for five seconds. The error codes should now display on the odometer. Press and hold the odometer reset button for five seconds to clear each code.

Where does the charge lead go on a Harley Davidson?

The battery charge lead runs form the voltage regulator to the positive side of the battery. The AC output lead wire leads from the voltage regulator to the stator.

What happens if you don’t charge your bike battery?

A by-product of this process is sulphation, so if you don’t keep your battery charged (either by riding the bike or using a battery charger), it will eventually get to a stage where the sulphation causes a short-circuit and you won’t be able to start your bike – or recover your battery.

Why do so many runners use the glidecycle?

Gravity is the root cause, as so many runners and walkers simply can’t bear the pounding of 2.4 times their weight in ground reaction force. (BYU Study) A Brigham Young University sports research study found that, “runners using the GlideCycle experienced an 86% reduction in ground reaction force (GRF).”

Where can I place a secure order for glidecycle?

You can place a secure order today on the Shop GlideCycle page or visit our contact us page to talk to a GlideCycle Trainer.

Why did my Toyota Prius battery go dead?

Left courtesy lights on over nite and the battery went dead. Replaced the battery, wont even turnover at all. Alarm goes crazy, then stops , then goes off again, but never any power going to the starter to turn over. Also, jump does no good at all.

What does it mean when your car battery won’t start?

Fob basically acts like it is dead. Won’t work door. The battery is good, little light blinks as you push lock/unlock etc. car will go to accessory with lights doors radio wipers etc working. Just will not start. It is a possibility that the new battery isn’t fully charged but only enough to power on the lights.

What happens when you change the battery in a Toyota?

Came back the next morning, left overnight in parking lot, and fob worked and car cranked. Nothing different from when it wouldn’t crank and fob wouldn’t except an overnight sleep at the parking lot. Toyota neglected to mention anywhere that changing a battery can cause the software to go nuts.

What happens if you leave your car lights on and your battery is dead?

If you left car lights on, this drains the battery in the car to keep them going. When you try to turn them back on, your car may not start. Here’s what to do when your car battery is dead and how to stay safe on the roadways in all cases.

How can I bypass the car theft alarm?

It is likely to turn off the light and start the car. Remember that this is the state where the vehicle is on but the engine is off. All the necessary components like the radio and dashboard lights will be powered up, which makes it possible to bypass the theft alarm. When you are outside the car.

What to do when your car alarm wont work?

After inserting the key into the driver’s door lock, turn the key to unlock, lock and then lock position again. Then, turn it again to the unlock position and the alarm is likely to be disabled now. Run the car for at least 10 minutes after cranking the engine to allow the car to reset the alarm. Keep the Car Thieves Away with these 5 Tips!

Navigation