Whats required when installing a ShelfTrack system?
ShelfTrack Hang Track Installation When installing ShelfTrack™, always secure the hang track first. At a desired height, level hang track with overhang positioned at top. Mark hole locations every 16 inches for studs and every 8 inches for concrete and drywall. Secure to wall based on wall type.
Can you cut ShelfTrack hang track?
Cutting Shelving, Closet Rods, and Hang Tracks Wire shelving can be cut using a bolt cutter or hacksaw. Closet rods can be cut using a pipe cutter (recommended) or a hacksaw. Hang tracks can be cut with a hacksaw. 7.
What size shelf screws standard?
1 ¼-inch flathead screws are the standard for attaching shelves. You can, however, also install shelves onto drywall providing you choose the proper screw.
What weight can ShelfTrack hold?
600 pounds
ClosetMaid’s heavy-duty Maximum Load ShelfTrack creates the ultimate garage storage solution for heavy and bulky items. Made with industrial-strength extruded steel, Maximum Load products can hold up to 600 pounds per 6′ shelf. Durable.
How far should screws go into wood?
The general rule of thumb is that the screw should enter at least half the thickness of the bottom material, e.g. 3/4″ into a 2 x 4.
How do you install shelftrack in a closet?
ShelfTrack installation starts by installing and leveling the hang track, which should be screwed into studs if possible. When installing ShelfTrack™, always secure the hang track first. At a desired height, level hang track with overhang positioned at top.
What’s the difference between shelftrack and fixed mount?
With the FixedMount system, the back of the shelf is attached to the wall using wall clips. It’s supported on the ends with sidewall brackets and in the middle with support brackets. While a fixed mount installation is less versatile than the ShelfTrack system, it is slightly more economical in the short term.
How big of a hole do you need for shelftrack?
When installing ShelfTrack™, always secure the hang track first. At a desired height, level hang track with overhang positioned at top. Mark hole locations every 16 inches for studs and every 8 inches for concrete and drywall. Secure to wall based on wall type.
How is a shelf attached to the wall?
As an alternative to the ShelfTrack system, there is a FixedMount system. With the FixedMount system, the back of the shelf is attached to the wall using wall clips. It’s supported on the ends with sidewall brackets and in the middle with support brackets.