What was the horsepower of a 1969 Pontiac Firebird?

What was the horsepower of a 1969 Pontiac Firebird?

Power output of the other engines was increased marginally. There was an additional Ram Air IV option for the 400 cu in (6.6 L) V8 engines during 1969, complementing the Ram Air III; these generated 345 hp (350 PS; 257 kW) at 5000 rpm and 430 lb⋅ft (583 N⋅m) of torque at 3400 rpm; and 335 hp (340 PS; 250 kW) respectively.

What was the horsepower of a 1969 Pontiac 428?

A contemporary Pontiac 400 V-8 Ram Air III in the GTO was rated at 366 hp in 1969, and the elusive Ram Air IV was rated at 370 hp. Of course, Royal Pontiac didn’t settle with the factory rating and tuned the 428 to around 425 hp.

When did the Pontiac Firebird model come out?

Pontiac Firebird. The Pontiac Firebird is an American automobile built by Pontiac from the 1967 to the 2002 model years.

What kind of engine does a Ford 428 have?

SCJ engines use 427 Le Mans-style rods with cap-screws and forged pistons. Beginning with the 1968 model year, Ford stamped a partial VIN number on production engine blocks. If the block has a casting date of 1967 or earlier, it is most likely a 428 Police Interceptor block and not a 428 Cobra Jet.

What kind of engine does a 1968 Pontiac Firebird have?

This 1968 Pontiac Firebird has instant appeal with its custom paintwork. But as you dig deeper, youll find other great upgrades in the interior and a stroker V8 under the hood. So it proves to you More Info › 350 V8, POWERGLIDE, ORIGINAL INTERIOR. This is a nice Firebird that runs and drives good.

When did the Pontiac 428 engine come out?

by James Jordan. The Pontiac 428 cubic inch engine was used only from 1967-69. It was one of the largest engines Pontiac produced, but it was used more to power big cars such as the Bonneville, and not as much for performance cars such as the Firebird. Since that time it has been used as a performance engine in several cars by drag racers.

Pontiac Firebird. The Pontiac Firebird is an American automobile built by Pontiac from the 1967 to the 2002 model years.

How much does a 1968 Firebird convertible cost?

1968 Pontiac Firebird convertible $30,000. NO LOW BALLERS ,TIRE KICKERS, &ONLY INQUIRE IF YOU ARE SERIOUS! | 4.1 OHC motor (rare) has approx 2500 miles on the rebuilt motor. | Automatic transmissio… More Info ›

Power output of the other engines was increased marginally. There was an additional Ram Air IV option for the 400 cu in (6.6 L) V8 engines during 1969, complementing the Ram Air III; these generated 345 hp (350 PS; 257 kW) at 5000 rpm and 430 lb⋅ft (583 N⋅m) of torque at 3400 rpm; and 335 hp (340 PS; 250 kW) respectively.

When did the Pontiac Firebird come out in the US?

Designed as a pony car to compete with the Ford Mustang and Mercury Cougar, it was introduced on February 23, 1967, simultaneous with GM’s Chevrolet division platform-sharing Camaro. This also coincided with the release of the 1967 Mercury Cougar, Ford’s upscale, platform-sharing version of the Mustang.

What kind of crankshaft did the Pontiac Firebird use?

The SD-455 consisted of a strengthened cylinder block that included four-bolt main bearings and added material in various locations for improved strength. Original plans called for a forged crankshaft, although actual production SD455s received nodular iron crankshafts with minor enhancements.

What kind of taillights did the Pontiac Firebird have?

The Firebird’s rear “slit” taillights were inspired by the 1966–1967 Pontiac GTO. Both a two-door hardtop and a convertible were offered through the 1969 model year.