What to do if your Hyundai Veloster warning light does not turn off?
1.Park the vehicle in a safe place and turn off the engine. 2.Turn on the engine again. 3.If the warning light illuminates and turns off in approximately 3 seconds, the system is operating normally. If the warning light does not turn off, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible.
When does transaxle indicator Blink on Hyundai Veloster?
• When the problem of gear system occurs, the transaxle indicator will blink. For your safety, take your vehicle to an authorized HYUNDAI dealer and have the system checked. • When the clutch is overheated, the safe protection mode operates. According to the safe protection mode, the transaxle indicator blinks with buzzer sound.
How can I bypass the lock on my Veloster?
Most automatic transmissions have a hidden switch that will allow you to bypass the lock. On the Veloster it is directly above the letters just outside the silver trim. There’s a little cover with a screwdriver slot. Open this up and insert something to bypass the lock.
When does a Hyundai Veloster oil pressure indicator come on?
Your dealer should be consulted for repairs. This indicator illuminates when the headlights are on and in the high beam position or when the turn signal lever is pulled into the Flash-to-Pass position. This indicator illuminates when the tail lights are on. This warning light indicates the engine oil pressure is low.
What does the transaxle indicator on a Hyundai Veloster mean?
According to the safe protection mode, the transaxle indicator blinks with buzzer sound. In this time, the LCD warning about safe protection mode also displays. In this condition, the driving may not be smoothly. If you ignore this warning, the vehicle may not drive smoothly and the system may have problem.
What does the EBD warning light on a Hyundai Sonata mean?
If the ABS warning light or EBD warning light is on and stays on, the speedometer or odometer/tripmeter may not work. In this case, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible. The driver’s seat belt warning light and chime will activate to the following table when the ignition switch is in “ON” position.
1.Park the vehicle in a safe place and turn off the engine. 2.Turn on the engine again. 3.If the warning light illuminates and turns off in approximately 3 seconds, the system is operating normally. If the warning light does not turn off, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible.
Your dealer should be consulted for repairs. This indicator illuminates when the headlights are on and in the high beam position or when the turn signal lever is pulled into the Flash-to-Pass position. This indicator illuminates when the tail lights are on. This warning light indicates the engine oil pressure is low.
According to the safe protection mode, the transaxle indicator blinks with buzzer sound. In this time, the LCD warning about safe protection mode also displays. In this condition, the driving may not be smoothly. If you ignore this warning, the vehicle may not drive smoothly and the system may have problem.
If the ABS warning light or EBD warning light is on and stays on, the speedometer or odometer/tripmeter may not work. In this case, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible. The driver’s seat belt warning light and chime will activate to the following table when the ignition switch is in “ON” position.