What to do if your Honda ATV Sparkplug is on fire?
This unhooks the kill switch, ATV ignition switch and wiring for those switches. If the spark improves, the problem is within wiring from one of those switches or a switch itself is to blame. Now you’ll need to disconnect each switch (one at a time) to trace it to the failed part. 4. Test the stator resistance.
Where can I post photos of my Honda trx300?
Join our Forum! As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.
What should I do if my spark plug is not working?
1. Make sure the engine has the correct spark plugs and they’re gapped correctly. This might seem silly, but seemingly big problems are sometimes caused by the simplest thing. 2. Check the spark plug wire condition. 3. Disconnect the main electrical connector coming out of the engine, and then check for spark again.
This unhooks the kill switch, ATV ignition switch and wiring for those switches. If the spark improves, the problem is within wiring from one of those switches or a switch itself is to blame. Now you’ll need to disconnect each switch (one at a time) to trace it to the failed part. 4. Test the stator resistance.
Join our Forum! As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.
1. Make sure the engine has the correct spark plugs and they’re gapped correctly. This might seem silly, but seemingly big problems are sometimes caused by the simplest thing. 2. Check the spark plug wire condition. 3. Disconnect the main electrical connector coming out of the engine, and then check for spark again.
Why is there no spark in my ignition?
An ignition module requires some type of external input in order to activate. If your vehicle stalls unexpectedly during operation and will not start again, it is likely because of loose or corroded electrical connections in the ignition module. In this case, check the switch, clean oxidized terminals, and replace broken wires if necessary.
How to test Honda Foreman 500 with no spark?
hook one test lead to ground and the other to the blue/yellow tracer wire and measure resistance, there should be none. and it shouldnt even register. then put one test lead on the white wire and the other lead still on the blue with yellow tracer wire. ill be looking forwar for you test thank you.
Is there a spark on my Honda ignition?
Checked and there is no spark, took off the ignition coil to get it tested at Honda. Any thoughts, advice or other issues it could potentially be? Anyone konw the values of this coil so I could test it myself?
Is there no spark on my Honda Foreman?
No spark! Hey ya’ll, shut off the Foreman last night and couldn’t get it started again. Checked and there is no spark, took off the ignition coil to get it tested at Honda. Any thoughts, advice or other issues it could potentially be?