What to do if your CV axle does not come out?
CV Axle will not come out. I decided to change out my drivers side cv axle. I have taken off the wheel, removed the axle nut, loosened the three strut mounting nuts five turns, and used a puller to press out the driveaxle out of the hub. At this point the cv axle is left to be taken out of the transmission.
What to do if front axle does not engage in 4×4?
Easiest way if no rack or equipment. Unbolt front driveshaft and put in 4×4 and leave in park. Try to turn front yolk on front diff. If solid the front diff is locked and working. Bolt back in driveshaft and if you jack up truck on 4 jackstands and run in 4×4 if front driveshaft spins t-case is engaged and motor is working correctly.
How are CV axles used to propel a vehicle?
Constant velocity axles, commonly referred to as CV axles, are the component which transfers the power from the transmission to the wheels to propel the vehicle forward. They have a flexible constant velocity joint which allows the axle to flex in a variety of ways in order to accommodate for wheel movement…
How do you remove a CV axle from a Kia?
Wiggle the knuckle off, or place a pry bar between the strut and the knuckle until they are separated. Push or tap the CV axle shaft through the wheel hub until the two are separated. III. Removing the CV Axle From the Transmission Remove the splash guard that covers the crank shaft and harmonic balancer.
When do CV axles need to be replaced?
Because the CV axles are the direct link that transfers the power of the engine to the wheels, they are subject to high levels of stress over time and will eventually wear out and require replacement for proper functionality to return. When they do wear out, the CV axles will usually show symptoms to let the driver know they require attention.
What are the symptoms of a bad CV axle?
1. Loud clicking noises when turning or accelerating. One of the most common and noticeable symptoms of a bad or failing CV axle shaft assembly is an audible clicking noise when turning or accelerating. When CV axles become excessively worn, the constant velocity joints will become loose and click when turning or accelerating.
What should I do if my CV shaft is bad?
CV axles serve as the final link between the engine and the wheels. They serve the important function of transferring the torque from the drivetrain to the vehicle’s wheels in order to move the vehicle. If you suspect that one or more of your CV axle shafts may be having a problem, contact a technician to inspect the vehicle.
Can a cracked CV boot cause axle failure?
A torn or cracked CV boot will leak grease that ends up tossed around while the axle turns. A leaky boot will eventually lead to CV joint failure, as dirt and debris will get into the boot and damage the joint.