What size speakers are in a 2002 Mitsubishi Lancer?
Speakers that fit your 2002 Mitsubishi Lancer*
| Speaker location | Speaker sizes** |
|---|---|
| Front Door | 6-3/4″ |
| Front Pillars | Tweeter |
| Rear Deck Corners | 6-3/4″ |
What size speakers are in a 2003 Mitsubishi Lancer?
Speakers that fit your 2003 Mitsubishi Lancer*
| Speaker location | Speaker sizes** |
|---|---|
| Front Door | 6-3/4″ |
| Front Pillars | Tweeter |
| Rear Deck Corners | 6-3/4″ |
How to replace the radio unit on a Mitsubishi Lancer?
Save yourself the labor costs and simply do it yourself following this step-by-step guide. In this guide I will be replacing the radio unit for a 2008 Mitsubishi Lancer. The model and part number of the radio unit may vary with year. The model/part number for the radio unit is: MN141319/DY-3W69U
Is there a wiring diagram for a Mitsubishi stereo?
Every Mitsubishi stereo wiring diagram contains information from other Mitsubishi owners. If you want to install a car stereo, you’ll love our Mitsubishi stereo wire guide.
How do you change the stereo on a Mitsubishi Eclipse?
Insert a double-DIN (a standard of measurement for stereo decks twice the height of average car stereos) faceplate adapter into the vacant stereo mounting dock of the Eclipse. Pull the speaker wires, antenna and amplifier signal cable through to the front of the faceplate adapter. Connect the stereo wiring to a wiring harness adapter.
How to remove Black Antenna from Mitsubishi Lancer?
Remove the black antenna connection by simply pulling it out. Remove both the large and small wire harnesses by firmly pressing in and holding the retaining clip. While continuing to hold down the retaining clip, firmly pull the harnesses out. Do not pull harnesses out by the wires, as you may damage or break the wires.
How tall is the stereo in a Mitsubishi Lancer?
A late interior update changed the mechanics of replacing the stereo, but single-DIN (2″ tall) or double-DIN (4″ tall) aftermarket receivers will fit in any of these Lancers.
How do you change the stereo in a Mitsubishi?
On the later cars, you start by opening the glove box door and removing one exposed Phillips screw on the passenger’s side of the box opening. Pry out the glove box side trim panel to release two clips, then remove the panel and remove the exposed Phillips screw.
Can you change the receiver on a Mitsubishi Lancer?
Installing a new receiver in your Lancer isn’t hard, but there are some differences between the 2008-13 models and the 2014-17 cars. You’ll start by opening the glovebox, prying out the trim with a panel tool, and removing one Phillips screw.
How do you find the radio security code on a Mitsubishi?
As part of the radio’s anti-theft system, the radio disables itself when it loses power from the vehicle’s battery. If the radio display indicates “CODE” or “OFF,” then the radio security code must be entered into the radio in order for the radio to work. 01How to find your Radio Code