What kind of water pump does a Pontiac use?
There were two style water pumps made for most Pontiacs. 8 bolt (1968 and earlier) and 11 bolt (1969 and later). Many early model Pontiacs with the 8 bolt style seem to have cooling issues. The cooling seemed much improved on the 1969 and later models. Many people convert their 1968 and earlier 8 bolt water pumps to the later model 11 bolt style.
How tall is a 1969 Pontiac water pump?
Using a flat object, place it against the face of the hub of the water pump as shown. Measure from that point to the rear of the water pump. This will give you the correct length (or some call it height) for the water pump you need. The early 1969 water pump was 11 bolt and measures 4″.
Do you need a pulley for a water pump?
No matter if it’s simply a water pump upgrade, change from the 4″ to a high flow water pump and need the pulley, or you decide to upgrade from the 8 bolt, we have replacement timing covers, plates, sleeves, high flow water pump, and pulley kits to meet your needs. Click here to check out our water pumps, kits, conversion kits, and more here.
How do you remove water pump pulleys on radiator?
Slide the drain pan under the radiator petcock. Open the petcock and allow the antifreeze mixture into the drain pan. Close the petcock. Loosen the water pump pulley bolts, but do not remove them. Loosen the belt tensioners on the accessory drive belts.
What kind of pulleys did a Pontiac Grand Prix use?
The non-A/C cars used smaller crank pulley and a larger water pump pulley and the A/C cars used a smaller water pump pulley and a larger crank pulley. Also use the same series timing chain cover and balancer to properly line up your timing marks. The same timing chain cover was used for both ‘64 & ‘65 and had just a simple pointer.
How tall are the pulleys on a Pontiac water pump?
These pumps have eight bolts and measure 3-5/8” long (from base to water pump pulley flange). The casting number for ‘64-‘65 is 9772716 and for ‘66-‘68 it is 4782482. The matching pulleys are 2” in height.
There were two style water pumps made for most Pontiacs. 8 bolt (1968 and earlier) and 11 bolt (1969 and later). Many early model Pontiacs with the 8 bolt style seem to have cooling issues. The cooling seemed much improved on the 1969 and later models. Many people convert their 1968 and earlier 8 bolt water pumps to the later model 11 bolt style.
What kind of brackets do you need for a Pontiac Grand Prix?
To use the accessory brackets from the 70 and earlier engines with the 71 and later damper and timing cover and water pump you need the 68-70 crank pulleys and the late 69 and 70 water pump pulleys. Many of the pulleys have the part number stamped on them.
How much does a water pump cost at Advance Auto Parts?
Advance Auto Parts has 38 different Water Pump for your vehicle, ready for shipping or in-store pick up. The best part is, our Pontiac Grand Prix Water Pump products start from as little as $33.99. When it comes to your Pontiac Grand Prix, you want parts and products from only trusted brands.
Can a 85 Chevy C10 have a water pump?
Water pump is an exact fit for my 85 Chevy C10, the hose outlet is machined not cast which made for an easy attachment of the hose to the water pump. Ordered this pump online from work.
Advance Auto Parts has 38 different Water Pump for your vehicle, ready for shipping or in-store pick up. The best part is, our Pontiac Grand Prix Water Pump products start from as little as $33.99. When it comes to your Pontiac Grand Prix, you want parts and products from only trusted brands.
Using a flat object, place it against the face of the hub of the water pump as shown. Measure from that point to the rear of the water pump. This will give you the correct length (or some call it height) for the water pump you need. The early 1969 water pump was 11 bolt and measures 4″.
Water pump is an exact fit for my 85 Chevy C10, the hose outlet is machined not cast which made for an easy attachment of the hose to the water pump. Ordered this pump online from work.
What are the specs of a Pontiac Firebird?
Engine Mechanical Specifications (LS1) General Data Engine Type V8 Displacement 5.7L-5665 cc 346 CID Bore 99.0 mm 3.898 in Stroke 92.0 mm 3.622 in Compression Ratio 10.1:1 Firing Order 1-8-7-2-6-5-4-3 Spark Plug Type 41-931 Spark Plug Gap 1.524 mm 0.06 in Lubrication System 5.678 Liters 6.0 Quarts
Can a 11 bolt water pump be replaced?
To do this, it takes a replacement 11 bolt timing cover, water pump plates, sleeves, and the 11 bolt water pump. This is a pretty easy change. There is also a difference in impellers. Many aftermarket OEM style water pumps come with stamped impellers as seen in the image.
How to remove water pump from Camaro Firebird?
LS1 three water pump hoses. Use the 10mm socket to remove the six bolts holding the water pump to the block. You may need to use the 10mm combination wrench to remove one bolt on the driver’s side of the engine. Once the six bolts are removed, take the water pump off of the engine.
How do you remove a water pump from an engine?
Use the 10mm socket to remove the six bolts holding the water pump to the block. You may need to use the 10mm combination wrench to remove one bolt on the driver’s side of the engine. Once the six bolts are removed, take the water pump off of the engine. On a flat clean surface, place the old water pump next to the new water pump.
How is coolant drained from a Camaro Firebird?
Place the clean drain pan under the radiator at the pet cock drain (Figure 1). Ensure the pan is large enough to hold more than eight (8) quarts of coolant. Take the radiator cap off and place it aside. Open the pet cock and allow the coolant to drain. It will take about 10 to 15 minutes for the coolant to finish draining.