What kind of fuel injection does a Toyota 22R-E have?
The Toyota 22R-E engine has an electronic fuel injection (EFI) system and ignition system with a mechanical distributor. In 1985, the 22R engine was redesigned, many parts from the newer 22R-E (such as cylinder head, block, pistons, the timing chain, and cover, water and oil pumps) are not compatible with those from the older pre-1985 engine.
What kind of carburetor does Toyota 22R have?
Cylinder bore and piston stroke are 92.0 mm (3.62 in) and 89.0 mm (3.5 in), respectively. The Toyota 22R engine has a carburetor fuel system and ignition system with a mechanical distributor. In 1983, Toyota swapped the dual-row timing chain used in older 22R engines for a single-row chain with plastic guides.
When did the Toyota 22R E engine change?
In 1985, the 22R engine was redesigned, many parts from the newer 22R-E (such as cylinder head, block, pistons, the timing chain, and cover, water and oil pumps) are not compatible with those from the older pre-1985 engine.
How big is the intake valve on a Toyota 22R?
Intake valve head diameter is 45.0 mm (1.77 in), and exhaust valve head diameter is 37.0 mm (1.46 in). Intake valve duration is 248°, valve lift is 10.0 mm, and exhaust valve duration is 280°, valve lift is 9.7 mm.
What kind of compression ratio does Toyota 22R-E have?
The Toyota 22R-E has a cast-iron cylinder block with five bearing support system. It has a 92.0 mm (3.62 in) cylinder bore and 89.0 mm (3.5 in) piston stroke. Compression ratio rating is 9.0:1.
How much horsepower does a Toyota 22R-TE have?
The 22R-TE engine produced 137 PS (101 kW; 135 HP) at 4,800 rpm of maximum horsepower and 234 N·m (23.9 kg·m, 172 ft·lb) at 2,800 rpm of peak torque. The Toyota 22R-TE has a cast-iron cylinder block with five bearing support system.
When did the Toyota 22R engine come out?
In 1985, the 22R engine was redesigned, many parts from the newer 22R (such as cylinder head, block, pistons, the timing chain, and cover, water and oil pumps) are not compatible with those from the older pre-1985 engine.
What kind of compression ratio does Toyota 22R have?
The Toyota 22R has a cast-iron cylinder block with five bearing support system. It has a 92.0 mm (3.62 in) cylinder bore and 89.0 mm (3.5 in) piston stroke. Compression ratio rating is 9.0:1. After securing bearing cap bolts, make sure crankshaft turns smoothly by hand.
Toyota Motor Corporation produced the 2.4-liter 22R four-cylinder engine from 1981 to 1995, and introduced its fuel-injected 22RE version in 1982. The turbocharged 22RTE had a brief 1985-to-1988 production run. The engine underwent a significant redesign in 1985 to solve timing chain problems.
Can you use 22RE fuel injectors on IG more it?
Ig more it and you are missing out on a properly performing 22RE. We are building up a supply of cores, so for the time being you’ll have to send your specific injectors in for us to test and clean.
Is there a 22R / 22RE engine ready to ship?
Jim builds engines specific for each customer, so we do not have engines on a shelf ready to ship. Quality engine building takes time. Our version of a stock replacement 22R / 22RE. Built with the same attention to detail as any of our engines. No corners are cut. Designed and built to get the most out of your stock fuel system without sacrifices.
What do you want out of a Toyota 22RE?
The Toyota 22RE provides the most important thing that people want out of their engine, reliability. People don’t have time to be dealing with engine issues and want a car that gets them from point A to point B reliably and consistently.
The 22R was first available in 1981 with the 22RE becoming available in 1983. The 22RE was very similar to the 22R engine, but the E denoted the addition of electronic fuel injection (EFI).
How many valves does a Toyota 22RE have?
The 4 cylinder engine had 1 intake and 1 exhaust valve per cylinder, for a total of 8 valves. The Toyota 22RE provides the most important thing that people want out of their engine, reliability.
Where is the AFM located on a Toyota 22R-E?
While this information is based upon the AFM system in the 22R-E engine, most of it applies to other Toyota EFI engines. For specific information, be sure to consult the service manual for your model engine. On the 22RE engine, the AFM is located atop the air filter box.
When did the Toyota 22RE engine come out?
The Toyota 22RE and 22REC four-cylinder engines produced from 1982 through 1995 were almost identical.
When did the Toyota 22R go out of production?
The turbocharged 22RTE had a brief 1985-to-1988 production run. The engine underwent a significant redesign in 1985 to solve timing chain problems. As a result, many 22RE parts are not compatible with pre-1985 22R and 22RE engines. There were few differences between post-1984 22R and 22RE engines other than the 22RE having fuel injection.
What kind of engine does a Toyota 22RE have?
Head, Block and Valvetrain. The original 22RE was a cast iron engine. Another feature of this engine that helped with the durability was the use of soft piston rings. This allowed the cylinder bores to avoid ridges throughout the life of the engine.
What was the compression ratio of the Toyota 22R?
Both the 22R and 22RE had a 9-to-1 compression ratio. Carburetors varied through the production run. The 22R initially featured a stock single-barrel 326 cfm carb.
Why are Toyota 22R engines so bulletproof?
We all can agree that the 22R family of engines are bulletproof when maintained. One of the reasons why is that Toyota spent the time to engineer it with parts that actually last. We’ve seen most every version of the aftermarket parts available and 99% of the time, the OE part is still (by far) the best available.
Where is the cold start injector in the intake manifold?
The Cold Start Injector is the responsible for supplying more fuel into the intake manifold for an easier start on cold temperatures. It is located in the middle of the upper intake manifold plenum.