What kind of brake fluid do I need for a 2005 Pontiac Grand Prix?

What kind of brake fluid do I need for a 2005 Pontiac Grand Prix?

Pentosin DOT 4 Brake Fluid.

What kind of brake fluid does a Grand Prix use?

You can use either DOT 3 or DOT 4 fluid which are both glycol based. Do not use DOT 5 brake fluid, which is silicon based and is not compatible with the 97-03 Grand Prix braking system. Next I removed the plastic lug nut caps with a 19mm socket and loosened the lug nuts with the lug wrench.

What’s the best way to add brake fluid?

How to add brake fluid. Park the vehicle in a level area – Make sure the vehicle is stationary and on a level surface. Allowing the vehicle to move or having it at a steep pitch can make the fluid levels read incorrectly.

Where do you Bleed the brake lines on a Pontiac Grand Prix?

It is recommended that you begin bleeding the brakes lines at the wheel farthest from the master brake cylinder and then working your way towards the brake cylinder. On the 1997-2003 Grand Prix, that would be rear passenger wheel first, then the driver side rear wheel, passenger side front wheel and finally the driver side front wheel.

How to remove old fluid from master brake cylinder?

To remove the old fluid from the master brake cylinder, I used a sprayer bottle pump and a plastic water bottle. You could also go into the kitchen and borrow a turkey baster (but don’t ever use it for food preparation again).

You can use either DOT 3 or DOT 4 fluid which are both glycol based. Do not use DOT 5 brake fluid, which is silicon based and is not compatible with the 97-03 Grand Prix braking system. Next I removed the plastic lug nut caps with a 19mm socket and loosened the lug nuts with the lug wrench.

It is recommended that you begin bleeding the brakes lines at the wheel farthest from the master brake cylinder and then working your way towards the brake cylinder. On the 1997-2003 Grand Prix, that would be rear passenger wheel first, then the driver side rear wheel, passenger side front wheel and finally the driver side front wheel.

To remove the old fluid from the master brake cylinder, I used a sprayer bottle pump and a plastic water bottle. You could also go into the kitchen and borrow a turkey baster (but don’t ever use it for food preparation again).