What is the code for light switches?
This states that all light switches must be placed between 15 and 48 inches from the floor to ensure that wheelchair users can reach them. With this in mind, builders tend to work to a standard height by placing the switch plate’s bottom 48 inches above the floor.
What height do light switches go?
Part M of the Building Regulations (section 8) does not actually specify the required position but does go on to suggest that in habitable rooms this will be achieved by mounting the switches etc. between 45cm and 1200mm above the floor level (see below).
How high from the floor should electrical outlets be?
Standard Height for Outlet Boxes The standard height for wall outlet boxes is about 12 inches from the top of the floor covering to the bottom of the receptacle box (or 16 inches to the top of the box).
How high should outlets be off the floor?
Generally, you want to mount receptacle boxes with the bottom of the box about 16-inches off the floor. Coincidentally, this roughly equates to the same height as your garden variety 22-ounce framing hammer.
What height are electrical outlets?
What is the minimum height for a light switch?
The height from the floor to the middle of the switch plate should not exceed 48 inches, and the minimum height should not be less than 15 inches. When the switch is over a counter that has a knee space, and the counter depth exceeds 20 inches, the maximum height of a switch is reduced to 44 inches.
Can I daisy chain electrical outlets?
Electrical receptacles have two pairs of terminals so that you can daisy-chain multiple receptacles on a single circuit in an existing house.
Should ground prong be up or down?
With the ground in the upper position, the ground prong on the plug could pull out with the hot and neutral still energized, thus creating a possible electrocution hazard. Ground should be at bottom that way if the plug is accidentally pulled; the last prong to disconnect will be the ground.
What is the standard height for electrical wall switches?
What Is the Standard Height for Electrical Wall Switches? The National Electrical Code specifies that each room in a house should have at least one switch to operate lights in the room, but it doesn’t say anything about how high the switch should be. Many builders position switch boxes so the bottom of the box is 48 inches above the floor.
How tall should a light switch be in a kitchen?
Although 48 inches is the standard height electricians prefer for most rooms, this can be altered if local building codes permit. For example, switches are often placed at different heights in kitchens to allow for countertops.
Are there minimum height requirements for electrical outlets?
Baseboard electrical outlets used in relocatable partitions, window walls or other electrical convenience floor outlets are not subject to the minimum height requirements. This section shall not apply to existing buildings when the enforcing agency determines that compliance with these standards would create an unreasonable hardship.
Is it acceptable to have a switch and control in the same area?
Switches and controls that do not satisfy these specifications are acceptable provided that comparable controls or outlets, that perform the same functions, are provided within the same area and are accessible.