What is a front park light?
Parking lights are another light on the front of a vehicle. They can be mounted in the front bumper, the grille, or to the body itself. Sometimes parking lights flash when you flick the turn signal switch on the steering column, sometimes they light up with the headlights, and sometimes they do both.
Where do the tail lights go on a Subaru?
“P” of the Switch goes to FB-3, which connects to the tail, clearance and license plate lights circuit. When the Switch is in the ON position, the exterior lights work, so that confirms all the wiring from “P” onwards through FB-3.
Why are my tail lights and marker lights not working?
My tail lights, marker lights, and license plate lights are not working. Brake lights, signals, headlights, hazards all work fine. I’ve replaced both the fuses and that hasn’t fixed the problem. Diagram shows a Tail and Illumination relay and I thought it might be that but the illumination on the dash works fine.
Where does power come from for tail lights?
In the following section of the wiring diagram, when the Parking Switch (upper left) is in the OFF position, power comes from FB-2, fuse 7, to “B” on the switch, but goes no further. At the same time, the Tail & Illumination Relay provides 12 V to “T” of the Switch, when the main ignition switch (key) is in the ON (IGN) position.
Is the brake light the same as the tail light?
Please note your factory bulb contains two filament. This means it has one filament for the tail light and one filament for the brake light. Your led will only come when the brakes are applied because you don’t have two lights in that one led. You may have a blown fuse.
“P” of the Switch goes to FB-3, which connects to the tail, clearance and license plate lights circuit. When the Switch is in the ON position, the exterior lights work, so that confirms all the wiring from “P” onwards through FB-3.
My tail lights, marker lights, and license plate lights are not working. Brake lights, signals, headlights, hazards all work fine. I’ve replaced both the fuses and that hasn’t fixed the problem. Diagram shows a Tail and Illumination relay and I thought it might be that but the illumination on the dash works fine.
In the following section of the wiring diagram, when the Parking Switch (upper left) is in the OFF position, power comes from FB-2, fuse 7, to “B” on the switch, but goes no further. At the same time, the Tail & Illumination Relay provides 12 V to “T” of the Switch, when the main ignition switch (key) is in the ON (IGN) position.
Please note your factory bulb contains two filament. This means it has one filament for the tail light and one filament for the brake light. Your led will only come when the brakes are applied because you don’t have two lights in that one led. You may have a blown fuse.