What does rekey ignition mean?
For security purposes, rekeying an ignition lock is sometimes cheaper than having a locksmith install a new lock. Rekeying doesn’t replace the lock; it changes the tumbler set inside the lock to accept a new key with a different cut pattern. The change in tumblers requires moving them within the lock.
How can I find out the Code of my vats key?
If you have a functional vats key, and you want to know the code, you can measure its value by placing the ohm meter leads on the VATS key resister pellet. Once you find the pellets ohm value of the resister, you can determine the key code by looking up the resistance value in the chart below.
How does a VATS key work in a lock?
Every VATS key produced with a unique resistor on the key blade and possesses a possible codes of 1 out of 15 values. By assigning a vats key with the correct resister pellet, the driver inserts the key blade into the ignition lock, which then make a contact with the resister pellet on the key so the electronic VATS system can reads its value.
What does the code on the vats pellet number mean?
The key code tells your locksmith (us!) how to cut your key. If you lose your last key and have both your key code and your VATS pellet number you can get a fresh code cut key that will start your car for WAY less than if you didn’t! More importantly knowing this info will save you LOTS of your time that you will never get back!
How to relearn Pats ignition key code program?
Cycle key 1 to RUN. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. Cycle an unprogrammed key in ignition to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Program.”
Can a car ignition be rekey to fit a new key?
Then the new cylinder can have the same key code as the old one. If this were not done, then you would have a key that works in your ignition, but not in you doors, and vice versa. You can have your ignition rekeyed to fit the original key, or have all other locks rekeyed to fit the new key.
How to find the resistance of a VATS key?
How to order the correct VATS Key: Method #1: 1. Use a multimeter to measure the Ohms value of the thin strip of metal on the plastic oval on the keyblade of your key. Place both probes of the multimeter on the strip while testing. 2. Choose the Resistor that most closely matches the Kilo-Ohms value of your key’s chip.
What kind of vats key do I need for my Chevy?
If your number is “4748”, then you need to purchase a #11 Double Sided Blank Vats Key for GM Vehicles. If your number is “524”, then you need to purchase a #2 Double Sided Blank Vats Key for GM Vehicles.
Can a new ignition key be decoded from an old key?
That new cylinder will have the existing wafers emptied. The old cylinder will be taken apart so that it can be decoded. Then the new cylinder can have the same key code as the old one. If this were not done, then you would have a key that works in your ignition, but not in you doors, and vice versa.