What does it mean when engine code p0401 is pulled?
The EGR valve is a great part of the engine because it helps reduce oxides of nitrogen in the atmosphere and also gives the engine a better fuel economy in the process. When the p0401 code is pulled, it means that your engine is not running at its most full potential.
What is the EGR code for insufficient flow?
The code relates to flow from the EGR to the intake. Remove EGR and throttlebody and clean the ports with intake cleaner and a scribe or snake. Also check for leaking gaskets or lines but usualy the system is just CLOGGED with hard carbon. Remove clog and flow will return and your light will not come back on. Loading…
What causes the EGR valve to stick closed?
1) Excess oil getting into the intake from the PCV system, or other causes of oil consumption. 2) Poor fuel that does not have good cleaners. 3) Unusual driving habits, especially short trips. 4) The EGR valve is sticking closed, but this should set a different code.
How do you unbolt the EGR valve on a car?
Unbolt the EGR valve. Unbolt the EGR chamber underneath the fuel, that is bolted on to the intake manifold. Soak the EGR chamber with a cleaner and scrub the hell out of it, this took me a while as you can see how dirty it was. I mean it was hard as a rock at some spots.
What could cause the code p0401?
Code P0401 is triggered when the EGR temperature sensor does not see enough of a temperature change when the EGR is commanded to open. These sensors tend to get a lot of carbon buildup that causes them to lose sensitivity to the heat from the EGR gases.
What does code p0402 mean?
What the P0402 code means. P0402 is an OBD-II generic code that the engine control module (ECM) has detected indicating the engine exhaust gas recirculation ( EGR ) valve is flowing too much recirculated exhaust gases when it is commanded to open the flow of gases into the intake manifold.
What are the functions of the EGR valve?
The function of the EGR valve is to recirculate small amounts of exhaust back into the combustion chambers of the engine in order to decrease the combustion temperature, thereby reducing the formation of smog-producing nitrogen oxides. EGR valves can malfunction by becoming stuck open or closed due to carbon buildup.
What does p0404 OBD code mean?
OBD-II Code P0404 is defined as a Exhaust Gas Recirculation Circuit Range/Performance NOx gases, which cause acid rain and respiratory problems, are formed when the engine’s combustion temperature is too high (2500° F). EGR systems are used to reduce the combustion temperature, thus reducing NOx formation. Aug 12 2019