What causes a transmission code of p0700?
Some of the most common causes of transmission codes include, but are not limited to: In rare cases, a faulty transmission control module can be to blame for a p0700 fault code. However, this is only the root cause in a very small percentage of cases.
Why do I get a p0700 code on my TCM?
The most likely reason the code appears is that the TCM detects a problem in the transmission. The P0700 code indicates a problem with the transmission. It should not be ignored, because there can be serious drivability problems now and in the future. The technician should check for all codes present to accurately diagnose the problem.
What to do if your p0700 is having trouble?
Monitor the Slip Speed, Lockup Duty Cycle and Output Shaft Speed for irregularities. One thing to try when fixing the P0700 code is to clear the code and take it on a road test. Before clearing out the data, record all present codes and any data from the scan tests. After the second road test, look for the codes that appear.
What to do if your transmission control system is malfunctioning?
If there is an automatic transmission control system fault, a transmission-specific DTC (diagnostic trouble code) will set in the TCM. Since there is no “Check Transmission Light,” the ECM sets an informational DTC P0700 and illuminates the MIL or CEL (malfunction indicator lamp or check engine light).
What does a p0700 code mean on a transmission?
When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transmission controls.
Why does TCM show an error code of p0700?
Transmission solenoid regulates the flow of fluid in the automatic transmission. So if there will be any problem in it TCM will detect and show the p0700 error code. If the transmission fluid level is low or it has become old then there might be an issue in the transmission leading to the p0700 error code.
Monitor the Slip Speed, Lockup Duty Cycle and Output Shaft Speed for irregularities. One thing to try when fixing the P0700 code is to clear the code and take it on a road test. Before clearing out the data, record all present codes and any data from the scan tests. After the second road test, look for the codes that appear.
How much does it cost to get a p0700 code?
Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem. What does this mean? The cost of diagnosing the P0700 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.