Is the Mercury Cougar XR7 G a show car?
Production Data Mercury Cougar XR7-G Production Data Atotal of 619 XR7-Gs were built. The first ten XR7-Gs were factory show vehicles with DSO codes of 84. A DSO code of 84 is listed in the company code list as “Home Office Reserve.” This in itself does not automatically make a car with DSO 84 a factory show car.
What is the DSO code for a Mercury Cougar XR7-G?
Mercury Cougar XR7-G Production Data. A total of 619 XR7-Gs were built. The first ten XR7-Gs were factory show vehicles with DSO codes of 84. A DSO code of 84 is listed in the company code list as “Home Office Reserve.” This in itself does not automatically make a car with DSO 84 a factory show car.
How big is the rear axle on a Mercury Cougar?
There were two different rear axles used in 1968 XR7-G production. They are known by their ring gear diameter as the eight-inch or the nine-inch axle assembly. Most 302 equipped XR7-Gs received the eight-inch rear axle.
How big is the rear axle on a Mercury XR7 G?
All 390 equpped XR7-Gs received the heavy duty nine-inch rear axle. Cars equipped with the 428 4V CJ engine received a special version of the nine-inch axle with severe duty 31 spline axles and four pinion differential assembly.
Production Data Mercury Cougar XR7-G Production Data Atotal of 619 XR7-Gs were built. The first ten XR7-Gs were factory show vehicles with DSO codes of 84. A DSO code of 84 is listed in the company code list as “Home Office Reserve.” This in itself does not automatically make a car with DSO 84 a factory show car.
Mercury Cougar XR7-G Production Data. A total of 619 XR7-Gs were built. The first ten XR7-Gs were factory show vehicles with DSO codes of 84. A DSO code of 84 is listed in the company code list as “Home Office Reserve.” This in itself does not automatically make a car with DSO 84 a factory show car.
What kind of transmission does a Mercury Cougar have?
All of the available Cougar transmissions were installed in the XR7-G. Automatic transmissions came with a real wood shift handle that featured a gold plated running Cougar. The manual transmissions received a molded wood grain plastic knob with an engraved shift pattern.
When did the Mercury Cougar convertible come out?
The third year of production, 1969, brought several new additions to the Cougar lineup. A convertible model was now available in either standard and XR-7 trim. The grille switched from vertical bars to horizontal bars.
Is the Mercury Cougar XR7 a good car?
1973 Mercury Cougar XR7 conv, solid car, nice paint, good orig int, factory tachometer, v8, auto, ps, pb, factory a/c, runs and drives… More This is a rare 1968 Cougar XR-7 with it’s original numbers matching drivetrain.
What kind of car was the 1971 Mercury Cougar?
The Cougar was Mercury’s entry in the pony car market and the XR7 convertible was easily one of the best looking. Finished in the… More 1971 Mercury Cougar XR7 Convertible, new interior, new top, 351 Cleveland (M code), 4 speed manual. The car came with factory air which… More Offered By: Private Seller
Is the Mercury Cougar the same as the Ford Cougars?
Sold only under the Mercury brand, this generation is the only version of the Cougar with no direct Ford counterpart (though export examples were badged as Ford Cougars). The introduction of the Cougar finally gave Mercury its own ” pony car “.
Where was the 1968 Mercury Cougar XR7 built?
1968 Mercury Cougar XR7 Ford 302 (4 barrel) motor Built in San Jose, CA Teal paint Black vinyl top Black interior BF Goodrich TA tires in good condition Full transmission rebuild 8/2/2017 at Swinehart’s Transmission, Vancouver, WA This car is in great condition.
What kind of engine did the Cougar have in 1989?
The biggest news was that, for the first time in Cougar history, no V8 engine would be offered in 1989 (nor 1990). The lowered cowl of the new MN12 chassis did not allow the traditional 5.0L (302 cid) V8 to clear the hood; engineers would continue to work on getting the V8 to fit without a power decrease and finally get it into the cars for 1991.
When did the Ford Cougar XR 7 come out?
The first XR-7s were offered mid-year, 1967 and remained an integral part of the Cougar line through 1973. Beginning in 1969, XR-7s were offered in both hardtop and convertible body styles. While XR-7 equipment varied somewhat over the years, the basics included:
What kind of engine does Mercury Cougar XR7-G have?
The majority of these specially ordered cars were painted buyer specified exterior colors other than those available as regular options. The XR7-G could be ordered with any of the available 1968 Cougar engines, with the notable exception of the 289-2V and 427-4V.
What are the VIN numbers on a 1967 Cougar?
The Cougar in our VIN sample was assembled in Dearborn. The next two VIN digits are the body series code. A 1967 through 1973 Cougar will have one of four numbers in this part of the VIN. As you can see from the chart below, our example Cougar is an XR-7 Hardtop. The engine code follows the body series in the VIN.
There were two different rear axles used in 1968 XR7-G production. They are known by their ring gear diameter as the eight-inch or the nine-inch axle assembly. Most 302 equipped XR7-Gs received the eight-inch rear axle.