Is the 1998 Porsche Boxster a good car?
The 1998 Porsche Boxster has not been tested. Like what you see? Find the best deal on a Porsche Boxster today. There are for sale near you. Certified child passenger safety technicians conduct hands-on tests of a car’s Latch system and check the vehicle’s ability to accommodate different types of car seats.
Can you use 95 octane in a Porsche Boxster?
That doesn’t mean you should do it. It will wind back the ignition if you use 95 Octane, which will reduce power and efficiency slightly, but bear in mind that the method for detecting 95 Octane is to detect the pre-ignition (i.e. pinking/knock), caused by the lower quality fuel.
What kind of oil should I put in my Porsche Boxster?
However, if synthetic oil was the only type of oil that your engine has seen, I usually recommend sticking with it. Fill your oil tank from the oil filler hole located in the rear trunk. Add about 5 quarts to the engine, and check the dipstick (1997-04), or the oil level gauge (2005-).
What happens if I put Super Unleaded in my Boxster?
It will say super unleaded. That doesn’t mean you should do it. It will wind back the ignition if you use 95 Octane, which will reduce power and efficiency slightly, but bear in mind that the method for detecting 95 Octane is to detect the pre-ignition (i.e. pinking/knock), caused by the lower quality fuel.
The 1998 Porsche Boxster has not been tested. Like what you see? Find the best deal on a Porsche Boxster today. There are for sale near you. Certified child passenger safety technicians conduct hands-on tests of a car’s Latch system and check the vehicle’s ability to accommodate different types of car seats.
What kind of transmission fluid does a Boxster use?
The Porsche part number for the transmission fluid is 999-917-545-00, but is almost $35 a liter. The Boxster also can use off-the-shelf Esso LT 71141, or Pentosin ATF-1, both available along with gasket/filter kits from PelicanParts.com. I would avoid using any other type of fluid in your transmission.
Can you do an oil change on a Boxster?
If your Boxster is too low to the ground to fit your oil change pan bucket underneath, then you will have to raise the car off of the ground (see Pelican Technical Article: Jacking up the Boxster ).
That doesn’t mean you should do it. It will wind back the ignition if you use 95 Octane, which will reduce power and efficiency slightly, but bear in mind that the method for detecting 95 Octane is to detect the pre-ignition (i.e. pinking/knock), caused by the lower quality fuel.
Where did Porsche make the Porsche Boxster 986?
Production of the 986 began at the former 928 facility in Stuttgart, Germany in 1996. Valmet Automotive also manufactured Boxsters under contract to Porsche at a facility in Uusikaupunki, Finland. The Boxster was Porsche’s biggest volume seller from its introduction in 1996 until the introduction of the Cayenne sport utility vehicle in 2003.
What was the cause of a Porsche Boxster engine failure?
Some Boxster models manufactured between 4 May 2001 and 21 February 2005 have suffered complete engine failure due to a fault with the intermediate shaft (IMS) bearing, which resulted in a class action lawsuit against Porsche Cars North America (referred to as Eisen v. Porsche Cars North America ).
When did the Porsche Boxster and Cayman come out?
The Porsche Boxster and Porsche Cayman are mid-engined two-seater sports cars built by Porsche. There have been four generations; the first generation Boxster, a 2-door, 2-seater roadster was released in 1996. The Cayman, a 2-door, 2-seater fastback coupé based on the second generation Boxster went on sale in late 2005.
Are there any problems with the 986 Boxster?
The upgraded aos features a doubling in size of capacity for scavenging and is less prone to sucking up oil during high speed cornering. M96 engines fitted to the 986 and 987 Boxster can have issues with a bearing at one end of the engine intermediate shaft. The shaft connects the two ends of the engine timing gear.
Why does my Porsche Boxster have an AOS problem?
The AOS has caused numerous issues on Porsche engines and is an item to be closely monitored. As the membrane in the AOS fails, oil is sucked into the air intake. Initially this can show up as a check engine light for fuel adaptations with oil being deposited on the o2 sensors causing emission faults.
Why does my Porsche Boxster have smoke coming from the engine?
A quick puff of smoke as you start a cold engine is not uncommon, especially on the Porsche flat six engine in the Boxster. There are many theories and various thoughts as to why this happens – none are proven.
What are the issues with a Porsche Boxster 987?
Coolant radiators and air conditioning condensers. The design of the Boxster 987 means that the vents at the front of the car often get clogged with leaves. If the biomass is left to rot, it can cause the coolant radiators and air conditioning condensers to corrode.
What to look for when buying a Porsche Boxster?
A comprehensive Pre-Purchase Inspection at Revolution Porsche’s Birstall workshop will help you to identify any immediate problems and to assess the overall condition of the Boxster you are considering buying, but it is still useful to have a checklist when you go to test drive the car for the first time. Key issues to look at include:
A quick puff of smoke as you start a cold engine is not uncommon, especially on the Porsche flat six engine in the Boxster. There are many theories and various thoughts as to why this happens – none are proven.
What was the problem with the first Boxster?
The first-generation Boxster had another rare problem of an IMS failure where the IMS (Intermediate Shaft) bearings failed suddenly and bombarded the engine with pellets. This issue was publicized enough for aftermarket companies to develop replacements of the bearings, to prevent the problem before it happened.
I bought my 1998 Porsche Boxster used with 45,000 miles and sold it recently with nearly 110,000. It was a wonderful car. So good, that we bought another newer one. The Boxster provides excellent performance and sophisticated engineering that can be easily used as a reliable daily driver.
How much does a 1999 Boxster engine cost?
My 1999 Boxster was recently diagnosed with the apparently very common intermediate shaft failure (IMS failure). The big surprise came when I heard the only way to fix this, is a complete engine replacement; $12000 for the part alone! Add the hours needed to put it in, and this is more then the cars current value.
Is the Boxter a good car to buy?
The newer Boxter’s are pretty tempting with the additional HP that has been brought up to 310hp. If they were just 200lbs lighter, they would be pretty awesome cars, but I suppose that’s why they make aftermarket CF products.
How tall do you have to be to drive a Porsche Boxster?
Not for taller people. About 6’2″ is it for comfort. Also expect some sticker shock for repairs/oil changes, etc. Reading the owners manual is a must as there are features that are not obvious and controls do not work exactly as most american cars.
When did the Porsche Boxster 986 come out?
If you want to be a part of the elite club of Porsche owners and still want to have fun with your drive, the Boxster is the way to do it. The very first generation, the 986, was introduced in 1996, the second 987 came in 2005, while the third generation, the 981, arrived in 2012.
Who was the designer of the Porsche Boxster?
A funny thing happened as the Boxster began taking shape. It became clear that the design, by American Grant Larson, working under design chief Harm Lagaay, was the best idea for the 986. And so, the concept car had indeed inspired a production design, even before it was shown to the public.
Are there 200 horses in a Porsche Boxster?
While many believed the first generation was a bit underpowered, 200 horses aren’t all that bad for a Boxster. Another grouse that many have against the 1997-1999 models of the Porsche Boxster was less-than-stellar headlights that proved to be less than effective on bad roads.
What kind of body does a Porsche restomod use?
For starters all the bodywork is replaced with custom carbon fiber body panels and the engine is reworked by engine manufacturers such as Cosworth and Ed Pink Racing Engines. The level of detail is astonishing, this is basically a new car, built from the ground up by artisans who would rather get it right than make money.
Who was the first person to restore a Porsche?
To collectors and old school aficionados they are a blight on the Porsche restoration scene. It all started in the 50s when Dean Jeffries modified his 356 Carrera’s body and ever since individuals have been modifying, customizing and making their cars faster.
What should I do if I have a Porsche engine problem?
In practice we strip the engine, assess the work needed to address the core Porsche engine problem (i.e. what it’s come in for) & identify other immediate issues to establish the minimum repair cost.
I bought my 1998 Porsche Boxster used with 45,000 miles and sold it recently with nearly 110,000. It was a wonderful car. So good, that we bought another newer one. The Boxster provides excellent performance and sophisticated engineering that can be easily used as a reliable daily driver.
Not for taller people. About 6’2″ is it for comfort. Also expect some sticker shock for repairs/oil changes, etc. Reading the owners manual is a must as there are features that are not obvious and controls do not work exactly as most american cars.
Is the Porsche 924 for sale in the US?
None for sale nearby. Instead: While living in Germany I owned a 924, then a 944 and then a 911 Carrera. I left them in Germany because I felt it wouldn’t be fun to drive a Porsche in the States.
Is it expensive to replace Porsche Boxster clutch?
Unfortunately, this flywheel can be expensive to replace. Porsche has released a Technical Service Bulletin on checking the dual-mass flywheel (TSB 911 8/02 1360), which I have placed on the 101Projects.com website for reference.
What kind of clutch disc do I need for 1997 Boxster?
Also be sure to only use a spring-centered clutch disc with a non-dual mass flywheel (see Figure 5 ). If you are looking for an easy performance upgrade for your 1997-04 Boxster, you can install the 987 Boxster/Cayman clutch package instead of the stock setup.
What happens when you remove the last bolt on a Boxster?
When you’re ready to remove the last bolt, grab the pressure plate with one hand – it’s easy for it to fall off when the last bolt is removed. The disc should also pop out when you remove the pressure plate. With the pressure plate removed, you should be able to see the flywheel.
What’s the quarter mile acceleration of a Porsche Boxster?
Also, consider Porsche Boxster quarter mile performance specs. Comparing cars is a real fun. Since 0-60 time has been considered the golden standard of cars’ performance, let’s put Boxster face to face with the rivals by analyzing 0 to 60 mph, 60 to 80 mph and a quarter mile acceleration data.
What kind of transmission does a Porsche Boxster have?
There are two transmissions available for consumers: a standard 6-speed-manual or an optional 7-speed automatic. Porsche refers to the latter as the Porsche Doppelkupplung automatic or PDK in short. The 6-speed-manual is a work of art. The short shifter and solid clutch work hand-in-hand to deliver remarkable performance.
Where are the speedometers on a Porsche Boxster?
The controls are all contemporary and there is nothing to indicate that the car was designed 30 years ago, as is the case with the 911. You have a large tachometer dominating the instrument panel, with a smaller 150-mph speedometer off to the left. Fuel and water gauges are located to the right.
https://www.youtube.com/watch?v=f5HUQ3ntg_M