How to replace rear shock absorbers-Mercedes C-class?
How to replace Rear Shock Absorbers – Mercedes C-Class – YouTube Please Note: This video is for guidance only and intended exclusively for professional technicians. Shock absorbers and struts are safety- critical component…
When do you need a new shock absorber set?
If the body bounces any more than that after pushing, it’s time for a new set. You also need to know if your vehicle uses stand-alone shocks that attach to the vehicle suspension or frame, or if it uses shock-absorber units which integrated into a suspension strut, such as the MacPherson or Chapman strut.
How do you replace a Ford rear shock absorber?
On some Ford products there’s an external motor drive, and you can unplug it from the old shock and install it on the new one. In most other cases, you get a choice of shock absorber designs. If the shock rod spins endlessly as you try to remove the upper mount, try Vise-Grips on the flatted end of the rod.
What causes rear shock absorber to tear loose?
If you can turn the mounting nut or bolt at the top or bottom without much effort, the mounting is loose. On some shocks there’s a stud in a rubber bushing, and if it tears loose, you’ll see and feel it turn as you try to tighten the nut.
What happens when rear shock absorbers go bad?
This condition can also cause your vehicle’s braking distance to increase, which is an obvious safety concern. Conversely, worn rear shocks will cause the back of the vehicle to drop excessively on acceleration. Steering precision and overall stability will be affected also.
How often should you replace your shock absorbers?
There is no established maintenance schedule for shocks to be replaced, but most shock absorber manufacturers recommend that they be replaced about every 60,000 miles. Step 1: Park your vehicle on a flat, hard and level surface with the parking brake applied. Step 2: Place the wheel chocks around the wheels that will remain on the ground.
What should be the resistance of a shock absorber?
Remove the shock from the vehicle and try compressing it by hand. If it moves easily, then the shock may be bad. A good shock should have some good resistance when compressing it, and most shocks will extend on their own when you release them.
Can a shock absorber cause a wheel to hop?
On the right, a new shock absorber on that same vehicle is able to keep the wheel pressed against the ground. If shocks become badly worn enough, they can even cause wheel hop on smooth road surfaces.