How to no start with the security light?
No start with the security light. I found a guy who had a trick that has worked every time. First thing you do is turn the key into the on position, and wait 10 minutes. Then turn the key off and back to the on position 3 times in a row. Apply your foot to the brake and put your shifter all the way down and back up 2 times.
What to do if your PassLock light does not turn on?
Insert the Key into the ignition switch and try to start the car. It should start, and then stall, with the “SECURITY” light flashing. (In rare cases, the car may keep running and the security light will not illuminate, but that only happens if you are very lucky.)
Why does my car not start when the security light is on?
As soon as the security light is on n i put the car on park n turn off the engine it won’t start at all it makes is a click sound before it would turn on after 10-20 min but now it don’t even turn on at all
How long does it take for a car security light to go out?
With the key still in the run position wait 10 minutes and the security light should blink and then go out. Turn the key off and wait 5 seconds. Repeat these steps for a total for 3, 10 minute cycles.
What should I do if my PassLock security light goes off?
If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine. If it starts and runs, everything is okay.
Is it normal for the security light to go off when the engine is running?
After the learn procedure is completed and the engine is running, the security light may stay on steady for a few minutes and then go off—this is normal. Depending on the system, replacement of key components will necessitate that a relearn procedure be completed.
Is the starter interrupt warning light on or off?
Depending on the current status of the system, the warning light will be off, on steady, or flashing. Although they may share the same dash-mounted warning light, these “starter interrupt” anti-theft systems work separately from and independently of the “content theft” systems available from factory and aftermarket suppliers.
How long does it take to turn off a GM security light?
Leave the key in the “ON” position for approximately 11 minutes. The security light will be steady on or flashing for the 11-minute period. Do not proceed to Step 2 until the security light turns off or stops flashing. 2. Turn the ignition switch to the “OFF” position for 30 seconds. 3.