How to check tightening torque on Suzuki GSX-R 1000?
: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c . Valve + guide unit: mm (in Camshaft + cylinder head unit: mm (in Cylinder + piston + piston ring unit: mm (in) Conrod + crankshaft unit: mm (in) Balancer unit: mm (in) Th …
What are the torque specs on a Suzuki?
Item N*m kg-m lb-ft Starter clutch bolt 10 1.0 7.0 Generator stator set bolt 10 1.0 7.0 Generator stator clamp bolt 5.5 0.55 4.0 Crankshaft position sensor set bolt 5.5 0.55 4.0
How to remove the rear seat on a Suzuki GSX-R?
To remove the rear seat, insert the ignition key into the lock and turn it clockwise. Raise the front end of the seat and slide it forward. To reinstall the seat, slide the seat hooks into the seat hook retainers and push down firm This motorcycle has a twin throttle cable system.
What kind of coolant to use on Suzuki GSX-R 1000?
Engine coolant description Caution use a high quality ethylene glycol base anti-freeze, mixed with distilled water. Do not mix an alcohol base anti-freeze and different brands of anti-freeze. Do not put in more than 60% anti-freeze or less than 50%.
How to tighten front axle on Suzuki GSX-R 1000?
Hold the front axle with the special tool and tighten the front axle bolt (3) to the specified torque. Tighten two axle pinch bolts (4) on the right fork leg to the specified torque. Tighten two axle pinch bolts (5) on the left front fork leg to the specified torque.
Item N*m kg-m lb-ft Starter clutch bolt 10 1.0 7.0 Generator stator set bolt 10 1.0 7.0 Generator stator clamp bolt 5.5 0.55 4.0 Crankshaft position sensor set bolt 5.5 0.55 4.0
To remove the rear seat, insert the ignition key into the lock and turn it clockwise. Raise the front end of the seat and slide it forward. To reinstall the seat, slide the seat hooks into the seat hook retainers and push down firm This motorcycle has a twin throttle cable system.
Engine coolant description Caution use a high quality ethylene glycol base anti-freeze, mixed with distilled water. Do not mix an alcohol base anti-freeze and different brands of anti-freeze. Do not put in more than 60% anti-freeze or less than 50%.
How much torque does a Hayabusa front teeth engine have?
Front teeth 18 – SPROCKET,ENGINE 27510-15H00, (36MM) Torque 105 lb-ft / 145 N.m (NOTE: Speed sensor ROTOR bolt torque is only 20 lb-ft / 28 N.m) (Speed sensor mounting bolts Torque 4.7 lb-ft / 6.5 N.m). Wedge Bulb (corners of headlight) 194 Cross Reference: T10, W5W, & 158. Bulb type is PY21W. The pins are slightly offset (ie not 180 degrees apart)
How much torque do I need for the rear axle?
Do NOT torque the 2nd gen rear axle nut that high, 50-55ft-lbs is plenty. The rear sprocket values are too high too, 25-30ft-lbs is enough. In general, with rare exceptions like rod and cylinder head bolts you’re better off leaving the the torque wrench in the bottom of the tool box.
: for the tightening torque of fastener not specified in this section, refer to “tightening torque list” in section 0c . Valve + guide unit: mm (in Camshaft + cylinder head unit: mm (in Cylinder + piston + piston ring unit: mm (in) Conrod + crankshaft unit: mm (in) Balancer unit: mm (in) Th
How much torque do you need in a Suzuki SV650?
The rear sprocket values are too high too, 25-30ft-lbs is enough. In general, with rare exceptions like rod and cylinder head bolts you’re better off leaving the the torque wrench in the bottom of the tool box.