How tall is the Suzuki GS 1100 g?
GS 1100 G 1982 Overall Length: Overall Width: Overall Height: Seat Height: 800 mm (31.5 in) Wheelbase: 1 495 mm (58.9 in) Weight: 247 kg (543 lbs) Engine type: Air-cooled 1 074 cc inline-4, DOHC, 8 valves.
Why is my 1982 Suzuki GS1100 not charging?
Re: Hi,my 1982 suzuki gs1100 is not charging the… it is most likely your regulator/rectifier. buy the one from Electrex and install it. very simple. just connect the red wire to the red wire and the three yellow wires to the other three misc. colored wires. For some reason suzuki made the three wires different colors? doesn’t need to be.
When did the Suzuki gs1000gl come out?
GS1000GL was manufactured between 1980 and 1982. GS1000GL 1980 Overall Length: 2 275 mm (89.6 in) Overall Width: 900 mm (35.4 in) Overall Height: 1 230 mm (48.4 in) Wheelbase: 1 500 mm (59.1 in) Ground Clearance: 150 mm (5.9 in) Dry Weight: 250 kg (551 lbs)
What was the name of the 1980 Suzuki GS 250 twin?
Magazine ad from USA – 1980 GS-250 Twin. Click to enlarge. GSX250 – the eight-valve version of GS250 – was called GS250 on the American market. The older GS-models had only two valves per cylinder. This free site is managed by Jarmo Haapamäki. so you can enjoy the spirit of giving too. Came here from a search engine?
Is the Suzuki GS1100GK a factory built motorcycle?
Like Honda’s Interstates, the GS-1100GK is a factory-built, full-boat tourer. Based on the recently introduced 1100cc shaft-drive model, the GK includes a full fairing, saddlebags, and a trunk, all built and fitted in Japan.
When did the Honda gl1100gk come out?
In 1980, Honda updated the naked Gold Wing and called it the GL1100. That year, they also changed what the GW would be about forever by creating a full dress tourer variant called the Interstate – you got a full fairing, saddlebags, and a removable trunk right off the dealer floor. Other manufacturers scrambled to keep up.
How many miles does a Suzuki GS 1000 have?
Suzuki gs 1000- 1060 kit, falcon crank , straight cut gears , mre lock up clutch , mre kill switch , dana coil packs and ignition , spoke wheels , ori… Well kept gs750L, third owner all garage kept. Under 9,000 original miles (I still ride it every now and then but the mileage sits around 8,750 right
What’s the price of a 1981 Suzuki GS 1000?
For Sale: 1981 Suzuki GS1000G that is very well modernizedPRICE: $6,350 OBO. The bike was a storage unit find before being brought back to life by the… Suzuki gs 1000- 1060 kit, falcon crank , straight cut gears , mre lock up clutch , mre kill switch , dana coil packs and ignition , spoke wheels , ori…
What kind of manifold do I need for a 1978 Suzuki GS 1000?
Anyone planning on building a 1978 GS 1000 2V Suzuki and doing a semi-pro ported head with 38 mm Lectron carbs, use Mikuni manifolds Part #VM 36 -200. When mounting Lectrons on your Suzuki GS1100/1150 use Dayco Radiator hose cut to 1-5/8″ length.
How tall is a Mercedes Benz gs1000l engine?
Overall Length: 2 275 mm (89.6 in) Overall Width: 900 mm (35.4 in) Overall Height: 1 230 mm (48.4 in) Wheelbase: 1 500 mm (59.1 in) Ground Clearance: 150 mm (5.9 in) Dry Weight: 250 kg (551 lbs) Engine type: Air-cooled 997 cc inline-4, DOHC, 8 valves. 90 ps (66 kW)/ 8.500 rpm, 8,0 kg-m/ 7.500 rpm. The picture shows the GS1000L.
Anyone planning on building a 1978 GS 1000 2V Suzuki and doing a semi-pro ported head with 38 mm Lectron carbs, use Mikuni manifolds Part #VM 36 -200. When mounting Lectrons on your Suzuki GS1100/1150 use Dayco Radiator hose cut to 1-5/8″ length.
Why does my gsx-1100 have an oil cooler?
There was even an old bike magazine article I came across in my travels, that declared that there were cooked GSX-1100 heads propping open garage doors all over England, because people had failed to redirect the oil when they installed an oil cooler! I now think that all this is plain wrong.
Can a GPZ head be installed on a kz-1000 Kawasaki?
When installing a GPZ head on a KZ-1000 Kawasaki bottom end you must install a cam conversion tower. If the crank has a 15 tooth sprocket use a 122 link cam chain and KZ 900/1000 cam sprockets (30 teeth).
What kind of carbs do I need for a gsxr-1100?
For those of you who are planning on running 40mm Mikuni Radial Slide carbs on your ’91-92′ GSXR-1100 motors, use the intake manifolds from a 1988-89 GSXR-750 and match these to your intake ports.