How do you take the dashboard off of a Jeep Grand Cherokee?
Insert the flathead screwdriver under the panels at the bottom of the dash by the doors. Pull down on the screwdriver to pry the panels off. Remove the retainer screws for the kick panels and pull the kick panels straight out.
How do you remove the glove box on a 2004 Jeep Grand Cherokee?
Open the glove box and remove the two rubber stop tabs on the top lip above the open door. They look like a sideways “D” and can be pulled straight down to remove them. If your glove box has a dampener on the side, release the clip from the glove box to lower it down all the way.
How to disassemble a Jeep Grand Cherokee dashboard?
Remove the final retainer bolt positioned on top of the brake pedal in a similar fashion.Slide the dash towards you and disconnect the electrical connectors going into the back side of the dash. Drag the dash up and carry it out of your Jeep. “Jeep Grand Cherokee 1993 thru 2004: All Models; Haynes Repair Manual”; John Haynes; 2004
How do you remove radio from Jeep Cherokee?
Identify the two retainer screws for the radio panel. There is one screw on each side of the radio. Remove these screws with the Phillip’s head screwdriver and slide the panel forward. Unplug the radio’s electrical connectors. Drag the heater control assembly forward.
What makes up the dashboard of a jeep?
The dashboard is composed of many pieces including the gauges of the instrument cluster and the surrounding panel, the defroster vent cover and radio panel, along with the panel that surrounds the heater controls. Park your Jeep and apply the parking brake.
How do you remove kick panels from Jeep?
Remove the retainer screws for the kick panels and pull the kick panels straight out. Pry off the trim pieces going around the glove box using the flathead screwdriver to reveal the retainer bolts. Remove these bolts with the socket wrench. Locate the retainer bolts on the ends of the dash panel and remove them with the socket wrench.
Remove the final retainer bolt positioned on top of the brake pedal in a similar fashion.Slide the dash towards you and disconnect the electrical connectors going into the back side of the dash. Drag the dash up and carry it out of your Jeep. “Jeep Grand Cherokee 1993 thru 2004: All Models; Haynes Repair Manual”; John Haynes; 2004
Can you replace blend doors on a Jeep Grand Cherokee?
Thought I’d share my experience of replacing blend doors on my WJ without removing the entire dash. The tech manuals say you have remove the entire dash to replace the blend doors; you do unless you are willing to make a simple cut with the Dremel tool.
Identify the two retainer screws for the radio panel. There is one screw on each side of the radio. Remove these screws with the Phillip’s head screwdriver and slide the panel forward. Unplug the radio’s electrical connectors. Drag the heater control assembly forward.
Do you have to remove dash to replace blend doors?
The tech manuals say you have remove the entire dash to replace the blend doors; you do unless you are willing to make a simple cut with the Dremel tool. Here’s what was going on with my WJ A/C: Sometimes it would be cold, sometimes it would be hot, sometimes driver side was cold but passenger side was hot.