How do you reset the oil change message on a Jeep Grand Cherokee?
fully depress the accelerator pedal slowly three times within 5 seconds and the OIL LIFE is reset
- fully depress the accelerator pedal slowly three times within 5 seconds and the OIL LIFE is reset.
- Turn off the ignition, then start the engine normally and the light should be reset.
How do you reset the oil change light on a 2006 Jeep Grand Cherokee?
Locate the “Step” button on the Grand Cherokee’s instrument panel and press it. Press it again until it says “Miles to Service.” Press in and hold the button for about five seconds. It should read “Reset.” This will turn off the service light on the display.
How to reset the oil change due light on a Jeep Grand Cherokee?
Follow the instructions below to reset the Oil Change Due Light on your Jeep Grand Cherokee: If your vehicle has an ignition button, press the ENGINE START STOP button twice without touching the brake pedal
How do I reset the oil change indicator?
– Pressed the break pedal before pushing the ignition button to start the car. Then pressed the accelerator three times within 10 seconds. It didn’t work. – Pushed the ignition button without pressing the break pedal, which activated accessory power. Then pressed the accelerator three times within 10 seconds. That didn’t work either.
How to reset the engine oil life system?
The engine oil life system must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Change Due Light on your Jeep Grand Cherokee: If your vehicle has an ignition button, press the ENGINE START STOP button twice without touching the brake pedal
What kind of oil does a Jeep Grand Cherokee use?
Jeep integrated with the 3.6-liter V6 Pentastar engine-powered 290 hp with 8-speed automatic transmission. When engine oil needs to replace, Oil Change Required or Change Oil message will appear on the display.
How to reset the oil service light on a Jeep Grand Cherokee?
fully depress the accelerator pedal slowly three times within 5 seconds and the OIL LIFE is reset Turn off the ignition, then start the engine normally and the light should be reset. About Jeep Grand Cherokee The Jeep Grand Cherokee is a range of mid-size SUV’s produced by the American manufacturer Jeep.
How do you change the oil on a jeep?
Step 1: Insert key into the ignition and turn key to “ON” without starting the engine. Step 2: Slowly depress the accelerator pedal three times in succession in under ten seconds. Step 3: The system should be reset. Turn the ignition switch “OFF,” then back to the “ON” position to check.
How to reset the Dodge oil change indicator?
Learn how to do this by following the directions below: Step 1: Insert key into the ignition and turn key to “ON” without starting the engine. Step 2: Slowly depress the accelerator pedal three times in succession in under ten seconds. Step 3: The system should be reset.
What does the oil change indicator mean on a jeep?
If your Jeep’s Oil Change Indicator system is indicating that your vehicle is ready for servicing, have it checked out by a certified mechanic, such as one from YourMechanic. Click here, choose your vehicle and service or service package, and book an appointment with us today.