How do you reset a Kenmore water softener?
If you press and hold the ON/OFF – HOLD button for 3 deliberate seconds, the water softener should go into a regeneration cycle. Be sure that you hold the button long for long enough. website if necessary. .
Why is my Kenmore water softener not working?
An empty salt tank, salt bridge, depleted resin, clogged or damaged venturi, broken rotor position switch or failed timer can prevent the water softener from producing soft water. If your water is hard, check the salt tank first. Fill the tank with salt if it’s empty.
Why is my Kenmore water softener filling up with water?
The water softener float valve controls the water levels in the brine tank. If it is set too high, excess water may build up, and your unit may not be able to release all the water after each discharge cycle. Once it is clean, reassemble the water level control valve and place it back into the water softener.
How do I know if my Kenmore water softener is working?
Another easy way to check for a malfunctioning water softener is to see if your soap lathers and bubbles. Pure liquid soap (such as Castille) will do this when mixed with soft water. If the water is hard, the same soap won’t function properly.
What to do if water softener is not working?
To get your soft water flowing again, here are three fixes you can easily perform.
- Fix 1. Clean the brine (salt) tank: Make sure the salt hasn’t formed a hard dome or crust inside the brine tank.
- Fix 2. Clean an iron-fouled resin bed:
- Fix 3. Clean the resin tank injector:
How do I reset my Kenmore water softener after a power outage?
Enter the “customer setting” mode on your water softener when the power returns and press display. Bring up the regeneration time setting and set the time for when you won’t need to use water, such as night. Next, hit display again to pull up the time settings, and rest your water softener for the correct time of day.
Why is there no water in my water softener brine tank?
This could be due to a clogged drain line/control, injector/venturi or brine line/valve. It might also be that the valve assembly in the salt tank cannot move or that water pressure in your house is too low (measure and adjust accordingly). Any blockages have to be removed.
How do you fix a brine tank that overflows?
How to Fix an Overflowing Water Softener Tank
- Inspect the Brine Line. One of the first things you have to do is ensure that the brine line is correctly attached to the float’s brine tank.
- Unclog the Tank Overflow.
- Use the Control Valve for Regeneration.
- Look Into the Drain Line.
- Check the Safety Float.
Why is my softener not working?
Most likely this is caused by a hard salt crust, also called “salt bridge“, that has formed in the bottom of the tank. The bridge prevents salt from falling down and dissolving in the water to form brine. If too little salt gets dissolved the resin can’t regenerate and will eventually stop softening.
What to do if you have a problem with your Kenmore water softener?
If you have a problem with your Kenmore water softener the first thing you should do is check to see if the repair will be under warranty.
How does the soft water valve on a Kenmore genius work?
WATER FLOW THROUGH THE SOFTENER VALVE soft water to valve outlet During FAST RINSE, the rotor & disc is positioned resin tank through distributor, to the drain. The electronic timer again energizes the motor to return the valve to service. As the valve rotates, the position switch lever drops to open the circuit.
What is error code 3 on Kenmore water softener?
Kenmore Error Code #3: If you are getting an Error code 3, it may be that the switch (pictured below) needs replacing. Here are the steps to replace this switch: Step 1: Unplug the unit. Step 2: Remove the lid of your softener so you can see the motor.
Where does the hard water come from on a Kenmore genius?
During service, hard water comes from the house main water pipe into the softener. Inside the softener resin tank is a bed made up of thousands tiny, plastic resin beads (FIG. SECTION 2 SOFT WATER SERVICE [-_BRINING: During brining, the brine is moved from the salt storage area, into the resin tank.