How do you replace a heater matrix?
Replacing Your Heater Matrix
- You will need: drill, foam padding, spanners or socket set.
- Step One: Remove the Heater Box.
- Step Two: Remove the Heater Matrix.
- Step Three: Fit the New Heater Matrix.
- Step Four: Replace the Heater Box.
How much horsepower does a Mk2 GTI have?
Engines
| Engine designation | Production | Power |
|---|---|---|
| 1.8 GTI | 1985–1991 | 100 hp (75 kW; 101 PS) at 5,500 rpm |
| 1.8 GTI | 1985–1991 | 102 hp (76 kW; 103 PS) at 5,250 rpm |
| 1.8 | 1987–1992 | 100 hp (75 kW; 101 PS) at 5,400 rpm |
| 1.8 | 1985–1991 | 106 hp (79 kW; 107 PS) at 5,400 rpm |
When was the Mk2 Golf GTI made?
1984
The Mk2 was launched in 1984, powered by a 1.8-litre eight-valve engine making a fairly underwhelming 110bhp. In 1985, the model gained hydraulic tappets (they can chatter from cold but should quieten down as the oil circulates). The 137bhp 16-valve GTI followed a year later.
How do I know if my heater matrix has gone?
5 Signs Your Heater Core is Leaking
- Your Car Smells Sweet. You may notice a sweet smell from your vents.
- Your car windows become foggy.
- Your car is blowing cold air into the cabin.
- Your car is devouring coolant.
- Your car’s cabin is cold, but the engine is hot.
Will Radweld fix heater matrix?
Radweld is compatible with coolant. Just pour and go. It seals holes in radiators, hoses, and the heater matrix. It will treat systems up to 14L capacity.
How much HP does Golf 2 have?
| Volkswagen Golf 2 1.8 90 Engine Technical Data | |
|---|---|
| Compression Ratio : | 10.0 |
| Maximum power – Output – Horsepower : | 90 PS or 89 bhp or 66 kW @ 5200 rpm |
| Maximum torque : | 145 Nm or 106 lb.ft @ 3300 rpm |
| Drive wheels – Traction – Drivetrain : | FWD |
Where are the clips on a Volkswagen Mk2 heater?
On the heater assembly there are 5 clips holding the heater to the aircon unit. 1 on the bottom, 2 in the front and 2 in the back. The back ones are a total bitch to get off and back on again…..
How did the VW Golf GTI Mk2 change?
The wheelbase grew 3in, track 1-2in, width 2in and length almost 7in from the Mk1, greatly increasing cabin space. Weight rose 10%, but aerodynamics improved dramatically – drag coefficient dropping from 0.42 to 0.34 thanks to integrated gutters, flush glass and more rounded styling.
How to replace the gasket on a Volkswagen Golf?
Use the old gasket sponge from the old core and place it on the new one….. Now replace the heater assembly and replace the 2 water pipes, nuts, clips, control cable, screws etc. Refill the coolant, start car, check for leaks.
Can a 25 year old VW GTI Mk2 overheat?
Injection (this is Digifant) is basically reliable, but senders and vacuum hoses can fail and, on K-Jet, the metering head can clog and the airbox flap can stick. The cooling system is effective, but any 25-year-old rad will be silted up. Check running temperature and signs of past overheating that may have warped head.