How do you flash Phoenix Award in BIOS?

How do you flash Phoenix Award in BIOS?

How to Update a Phoenix-Award BIOS

1. Visit the BIOS Agent Plus website listed in the Resources section.
2. Select “Free BIOS Scan” to download the BIOS Agent Plus software.
3. Double-click the file to run the installer program.
4. Wait for BIOS Agent Plus to generate a report of your system’s BIOS and drivers.

What is Awdflash?

Awdflash.exe is a utility program that helps you to update your BIOS – the code that runs the first moment you boot your PC. It was created by Award Software Inc. to support flashing Award BIOS based data files.

How do I flash a new BIOS?

Download the correct BIOS file that matches your motherboard and version number in to your USB device. Extract the BIOS-zip file that you have downloaded and paste it to your USB storage device. Select USB storage that comes with the downloaded BIOS. Select the BIOS file that you wishes to update and press “Enter”.

How do you get to the boot menu in Phoenix BIOS?

During the system post tap the F11 key (or the key your specific board manufacturer specifies) to get into Boot Menu. You should now be presented with a boot screen. Use the up/down arrow keys to select the Hard Disk option from the menu and press Enter to accept.

How do I upgrade my BIOS Award?

Only supported a Floppy Disk.

1. Download the latest BIOS file from the BIOSTAR website to a floppy disk.
2. Insert the disk that contains the newest BIOS file into the floppy drive.
3. Power ON the computer.
4. Press [DEL] key in POST screen to enter CMOS setup.
5. Select ” Upgrade BIOS ” item then press Enter, refer to Figure 1.

How do I flash BIOS from DOS boot disk?

Flash BIOS by DOS Tool Power on the notebook and press “F11” key to open the Boot Menu. Then, select to USB flash disk.

How do you use Awdflash?

FAQ

1. Make a bootable DOS floppy disk then copy AWDFLASH.exe utility and correct BIOS file.
2. Insert the disk into floppy drive and press Enter key.
3. System will boot-up to DOS prompt.
4. Type Awdflash xxxxxxx.bf /sn/py/r in DOS prompt.
5. System will update the BIOS automatically and restart.

How do you flash a BIOS that won’t boot?

Follow these steps:

1. Turn off all peripheral devices connected to the computer.
2. Remove the computer cover.
3. Move the configuration jumper from pins 1–2, to pins 2–3.
4. Plug AC power back in and turn on the computer.
5. The computer should automatically boot into BIOS Set Up Maintenance Mode.

How do I get to advanced BIOS settings?

Boot up your computer and then press the F8, F9, F10 or Del key to get in to BIOS. Then quickly press the A key to show the Advanced settings.