How do you connect two small hoses together?

How do you connect two small hoses together?

You can join them instead with a coupler, which consists of a barbed rod that fits inside both hoses and a pair of rings for crimping the each hose onto the rod. Installation is identical to that for for installing a connector. You can use a coupler to join two hoses only if they have the same diameter.

Can you connect two pocket hoses?

Yes, the expandable hose can be attached to an existing hose. If your existing hose has push in connectors you will need to get a push in adapter that has a threaded female end to be able to join the two hoses.

Do expandable hoses work with sprinklers?

While you can technically use a sprinkler with an expandable water hose, it is not advised. Expandable models increase in length when they are filled with water, which tends to move the sprinkler around when turned off and on, potentially damaging the lawn. Securing the sprinkler is a possible solution.

What do I need to connect two garden hoses?

If your existing hose has push in connectors and can’t connect, you will need to get a push in adapter that has a threaded female end so you can nicely join the two hoses (see below for this process). Generally, all garden hoses are accompanied with a male and female hose thread connector.

How big of a connector do I need for male and female hoses?

Usually, you will find your connector comes with a 3/4″ male or female hose thread connection and a barbed rod that will fit inside a 3/4, 5/8, or 1/2-inch hose. More importantly, if you have one connector on the hose and need the other one, make sure you determine if you need the female or male end otherwise your purchase will be useless.

Can a coupler be used to connect two hoses?

You can just use a coupler to join both of your hoses. A coupler is composed of a barbed rod that will fit inside both hoses (not just one) and a pair of rings so you can crimp each hose onto the barbed rod. However, make sure both of your hoses are the exact same diameter if you are planning on using a coupler.

Can a push in hose be attached to an expandable hose?

The expandable hose can be attached to an existing hose (expandable or not) if measurements are appropriate. If your existing hose has push in connectors and can’t connect, you will need to get a push in adapter that has a threaded female end so you can nicely join the two hoses (see below for this process).

If your existing hose has push in connectors and can’t connect, you will need to get a push in adapter that has a threaded female end so you can nicely join the two hoses (see below for this process). Generally, all garden hoses are accompanied with a male and female hose thread connector.

Do you need male and female hose connectors?

Generally, all garden hoses are accompanied with a male and female hose thread connector. If you are missing one or one is broken, you can cut it off and simple install new ones.

The expandable hose can be attached to an existing hose (expandable or not) if measurements are appropriate. If your existing hose has push in connectors and can’t connect, you will need to get a push in adapter that has a threaded female end so you can nicely join the two hoses (see below for this process).

You can just use a coupler to join both of your hoses. A coupler is composed of a barbed rod that will fit inside both hoses (not just one) and a pair of rings so you can crimp each hose onto the barbed rod. However, make sure both of your hoses are the exact same diameter if you are planning on using a coupler.