How do you change the thermostat on a Dodge Caravan?
Remove the two water-outlet housing bolts using a ratchet and socket. Lift the water-outlet housing off the engine and remove the thermostat and gasket. Clean the sealing surfaces on the water-outlet housing and engine using a plastic scraper to avoid damage to the surfaces.
What should bleed hole be on Dodge Caravan thermostat?
If you have a 2.4L engine, the bleed hole on the thermostat should point upward. If you have a 3.3L or 3.8L engine, align the two notches on the thermostat with the small bumps on the mounting surface on the engine.
Why does my Dodge Grand Caravan not heat up?
If the thermostat in the 2002 Dodge Grand Caravan malfunctions, the engine may not warm up properly and you may not be able to heat the cabin of the vehicle. This is annoying for the driver and passengers, especially if the thermostat fails in the winter.
How do you replace the thermostat in a car?
Pull the thermostat out of the engine. Remove and discard the thermostat gasket. Clean the surface of the thermostat housing and the engine with a clean towel. Install the new gasket. Put the new thermostat into the hole. Place the thermostat housing on top of the gasket. Thread the bolts into the housing with your fingers.
How much does it cost to replace the thermostat on a Dodge Grand Caravan?
Dodge Grand Caravan Car Thermostat Replacement costs $136 on average. What is an engine cooling system thermostat and how does it work? The car’s engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant.
If the thermostat in the 2002 Dodge Grand Caravan malfunctions, the engine may not warm up properly and you may not be able to heat the cabin of the vehicle. This is annoying for the driver and passengers, especially if the thermostat fails in the winter.
How do you find the thermostat on a caravan?
Locate the thermostat by following the upper radiator hose from the radiator to the housing on the engine. Pry the clamp off the hose with a pair of pliers. Pull the hose off the housing. Remove the bolts that secure the housing to the Caravan’s engine with a socket and ratchet. Pull the housing off the engine.
Pull the thermostat out of the engine. Remove and discard the thermostat gasket. Clean the surface of the thermostat housing and the engine with a clean towel. Install the new gasket. Put the new thermostat into the hole. Place the thermostat housing on top of the gasket. Thread the bolts into the housing with your fingers.