How do you change the shock on a Camaro Firebird?
Loosen the nut at the upper shock mount. Hold the middle shaft with a wrench if it begins to spin. Figure 5. Another view of the rear shock upper mount. Remove the bolt holding the shock to the lower control arm. Slide the shock down and out of the vehicle.
How do you put a new shock on a suspension?
Fit the new shock back onto the suspension control arm. You might need to use some pressure to constrict the shock as it falls into place, and you might need a help to help lift the suspension back up to reinstall the bolts in the correct positions. It can be kind of a balancing act, so it helps to have another set of hands.
How long does it take to replace rear shocks?
How long does it take to replace rear shocks? It will take about 30 minutes if you’re learning as you go. If you know what you’re doing, it will probably take about 20 minutes. Thanks! Is it possible to put shocks in upside down? Yes, it is possible. Look for indicators such as the word “top.”
What’s the best way to replace a shock absorber?
Consult your owner’s manual to find out for sure. Use the same process to remove the nut that is positioned at the top and keep the nuts separate so you will know which one goes where when it is time to install your new shocks. Remove the shock absorber from the bottom and top bolts.
How to change rear shocks on Chevy truck?
Keep the floor jack near the lower shock mount and place the stands on position, cradling the axle. Before putting the vehicle’s weight on the stands, secure the stands once again. Step 5: Wear your safety glasses and slide under the truck to start the process of changing rear shocks. Remove the upper shock retaining bolt using the socket.
Loosen the nut at the upper shock mount. Hold the middle shaft with a wrench if it begins to spin. Figure 5. Another view of the rear shock upper mount. Remove the bolt holding the shock to the lower control arm. Slide the shock down and out of the vehicle.
How long does it take to replace rear shocks? It will take about 30 minutes if you’re learning as you go. If you know what you’re doing, it will probably take about 20 minutes. Thanks! Is it possible to put shocks in upside down? Yes, it is possible. Look for indicators such as the word “top.”
How do you remove a shock from a suspension?
Use a socket set or a nut splitter to disengage the nut that connects the shock to the suspension, and remove it from the bolt. If there isn’t enough room to operate the splitter, you can apply penetrating solvent.