How do you change the coolant in a Nissan Maxima?
Empty the bucket of water as many times as necessary to flush out the radiator system. Close the drain plug at the bottom of the radiator. Fill the radiator with a mixture of coolant and water. Follow the directions on back of coolant container for exact amounts.
How do you change the heater on a Nissan Maxima?
For a Nissan Maxima with manual climate control, turn your ignition key to “on” and set the heater control to maximum hot. Then turn ignition key to “off.” For automatic climate control cars, turn ignition switch to “on,” hold the “off” button of climate control for at least 5 seconds.
How do you drain coolant from a radiator?
Remove the drain plug from bottom of the radiator with a screwdriver. Allow the radiator coolant to drain completely. Remove the clip from the hose going from the top of the radiator to the coolant reservoir. Once the clip is removed, pull the hose and the reservoir out of the engine compartment.
How to flush the coolant in a Hyundai Santa Fe?
Drain Coolant – Drain the coolant from the system 9. Circulate Water – Run engine with distilled water and flush 10. Fill Coolant – Dilute coolant with distilled water and fill 11. Locate Hoses – Locate the coolant hoses and connection points 12. Burp System – Remove excess air in the cooling system 13.
What kind of coolant does a Nissan Maxima use?
Adding engine coolant (also known as antifreeze) to your 1996 Nissan Maxima is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter. Make sure to check your engine when it is cold for an accurate reading.
How to change the radiator in a Nissan Maxima?
Born and raised in California, Pruit attended Contra Costa Community College in San Pablo, Calif. and received an associate degree in the administration of justice. How to Change the Radiator in a 3.8L
Remove the drain plug from bottom of the radiator with a screwdriver. Allow the radiator coolant to drain completely. Remove the clip from the hose going from the top of the radiator to the coolant reservoir. Once the clip is removed, pull the hose and the reservoir out of the engine compartment.
Drain Coolant – Drain the coolant from the system 9. Circulate Water – Run engine with distilled water and flush 10. Fill Coolant – Dilute coolant with distilled water and fill 11. Locate Hoses – Locate the coolant hoses and connection points 12. Burp System – Remove excess air in the cooling system 13.