How do I install a cigarette lighter socket in my car?
Fitting a cigarette lighter socket
- Positioning. If there is no ready-made hole, find a suitable position on the dash or the centre console.
- Mark out. Cover your chosen area with masking tape to protect the surface.
- Cut out hole.
- Fit the socket.
- Securing the socket.
- Wiring up.
How can I get a cigarette lighter socket out of my car?
Fortunately, removing the socket is a relatively easy process that doesn’t require mechanical experience or many tools. To start, shut off the car and fuse to stop power from reaching the lighter. Then, you can get a socket out of the dashboard or the lower half of your vehicle by removing interior panels.
How do you test a cigarette lighter socket?
To test the lighter, you have to first find an exposed piece of metal in your vehicle, such as a bolt on the door. Hold the black probe to the piece of metal, then touch the red probe to the cigarette lighter socket. If the meter moves, the socket still has an active current and isn’t safe to touch.
What’s the best way to remove a lighter socket?
These slots allow you to grip the socket, but you need a strong piece of metal to remove it. The easiest tool to use is a lighter socket removal tool, which looks like a small metal bar with a pair of prongs on the end. Fit the prongs into the slots to begin removing the socket. You can find socket removal tools online.
What are the plugs on a cigarette lighter?
It is often gray, but it might be a different color in your car. The plug always has a pair of wires, green and black, that make it recognizable. Some cigarette lighter sockets have 2 different plugs. One plug on the side holds the green ground wire while the other plug in the center holds the black power wire.
Fortunately, removing the socket is a relatively easy process that doesn’t require mechanical experience or many tools. To start, shut off the car and fuse to stop power from reaching the lighter. Then, you can get a socket out of the dashboard or the lower half of your vehicle by removing interior panels.
How to remove the socket from a Dorman cigarette lighter?
Then all you do is pull it out and the socket housing is out of the way without having to remove the actual metal socket!
To test the lighter, you have to first find an exposed piece of metal in your vehicle, such as a bolt on the door. Hold the black probe to the piece of metal, then touch the red probe to the cigarette lighter socket. If the meter moves, the socket still has an active current and isn’t safe to touch.
Can a cigarette lighter be turned off while the car is running?
Turn off the car’s engine using the ignition key. As long as you have your key out of the ignition, you are fine. Don’t try touching the lighter wires or the fuses while the car is running. Make sure the radio isn’t running since the cigarette lighter socket often shares a fuse with the other components in the middle of your car.