How do I change the oil in my Harley Softail?
On Softail models, the oil reservoir is located under the seat. Look directly below the seat– and slightly behind it – underneath the frame to find the oil drain plug. Use a ratchet and 5/8-inch socket to remove the drain plug. Once loose, finish removing the plug by hand to avoid dropping it into the oil pan.
How much is a 1995 Harley Davidson Softail worth?
Values
| Suggested List Price | Average Retail | |
|---|---|---|
| Base Price | $13,875 | $3,310 |
| Options (Change) | ||
| Total Price | $13,875 | $3,310 |
How often should I change my primary oil?
Oil changes as per Owners manual every 5k Miles, Tranny and Primary every 10K. If you ride it more you’ll be changing it more often.
How do you change the oil in a Softail?
Remove the oil tank filler cap and add up to three quarts of oil into the tank. Replace the filler cap and wipe way any oil spills with a shop towel. Start the motor and loosen the oil filter until a thin bead of oil begins to seep out from between the motor and the filter. Tighten the filter by hand and stop the motor.
What kind of oil does a 1999 Softail use?
The 1999 Softail series uses the same Twin-Cam 88 motor used in recent models, lubricated by three separate fluids for the engine, transmission, and primary. However, many riders are uncertain of how to to change the motorcycle’s engine oil, due mostly to the apparent absence of an oil drain plug.
Where is the oil filter on a Harley Davidson Softail?
Theoretically, the filter should be removable by hand only, but that is a rarity at best. The filter is located in front of the front V-Twin cylinder at the bottom. Turn the filter counterclockwise until it comes straight out.
Can you do an oil change on a Harley?
Harley-Davidson oil change is one of the most common DIY projects. Follow along as Bob teaches you how to drain the fluids on your Harley Softail, including the primary, engine oil and the transmission drain plugs.
How do you change oil in a Harley Davidson Softail?
Get your pan into position under the drain plug. Remove the oil fill cap. Remove the drain plug and let the oil drain into the pan. Figure 1. Remove this drain bolt and let all the oil drain from the bike.
How do you change the oil in a Heritage Softail?
Unscrew the drain plug with a 5/8-inch socket and a socket wrench, or loosen the drain hose clamp with a flat-head screwdriver and pull out the hose plug. Allow your Heritage Softail’s oil to drain for a minimum of five minutes or until the flow of oil slows to a thin trickle.
The 1999 Softail series uses the same Twin-Cam 88 motor used in recent models, lubricated by three separate fluids for the engine, transmission, and primary. However, many riders are uncertain of how to to change the motorcycle’s engine oil, due mostly to the apparent absence of an oil drain plug.
Can you replace the oil pump on a Softail?
Don’t despair, replacing the oil pump on your Softail isn’t as daunting a task as it might appear. There are only a few steps needed to remove and replace the oil pump.