How do I calibrate the touchscreen on my Jeep Compass?

How do I calibrate the touchscreen on my Jeep Compass?

Hold the up, down, and front defrost buttons simultaneously for about 5 seconds and then you are presented with the “Dealer Mode” menu. – Hold down the up, down, and Browse/Enter buttons simultaneously for about 5 seconds. That puts you into touchscreen calibration mode.

Where can I calibrate my compass?

If your blue dot’s beam is wide or pointing in the wrong direction, you’ll need to calibrate your compass.

1. On your Android phone or tablet, open the Google Maps app .
2. Make a figure 8 until your compass is calibrated.
3. The beam should become narrow and point in the right direction.

What causes a Jeep Compass to not start?

Select models of the Jeep Compass – including 2007, 2008, 2010, 2011, and more – developed situations where the vehicle had no crank or couldn’t start. It was caused by an electronic lockup of the wireless control module (WCM). Failure of this module causes the remote keyless entry system to be rendered useless.

How do you calibrate the compass on a jeep?

For further information, refer to “Compass Variance.” 1. Turn ON the ignition switch. 2. Press the UP or DOWN button until the Setup (Customer-Programmable Features) menu is reached, then press the SELECT button. 3. Press the DOWN button until “Calibrate Compass” is displayed in the EVIC. 4.

What are the warning lights on a jeep?

The following are warning lights and indicators found in vehicles built by Jeep. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are nearly 80 of them so be patient!

What happens when you turn off the compass?

Complete one or more 360–degree turns (in an area free from large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally.

Why does my Jeep Compass show the wrong direction?

Having same issue, notified Jeep cares, dealer has no resolution. My compass is up to 180* off when this is happening. I plug in my phone and my location is not only off but it continues to show me moving in the wrong direction as per the direction that the gps compass shows.

For further information, refer to “Compass Variance.” 1. Turn ON the ignition switch. 2. Press the UP or DOWN button until the Setup (Customer-Programmable Features) menu is reached, then press the SELECT button. 3. Press the DOWN button until “Calibrate Compass” is displayed in the EVIC. 4.

Is the GPS compass on the wrong direction?

I plug in my phone and my location is not only off but it continues to show me moving in the wrong direction as per the direction that the gps compass shows. Add info to the sticky… Jeep cares is wanting more info related to this. I also have this issue.

Why is my Uconnect compass wrong on my Jeep Wrangler?

They just installed the new Uconnect a couple of weeks ago because of the glitching issue. It has worked fine until yesterday. I just tried the driving in circles and UC reset. The driving in circles made the compass exacted opposite to what it is supposed to be.