How do I assign an IP address to my HP ProCurve Switch?
HP Procurve Switch # [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network. [Tab] to the Subnet Mask field and enter the subnet mask used for your network.
What is the default IP for Aruba switch?
no IP
In the factory default configuration, the switch has no IP (Internet Protocol) address and subnet mask, and no passwords. In this state, it can be managed only through a direct console connection.
How do I access the HP Procurve switch web interface?
Verify the configuration Enter https://10.1.1.1 in the address bar, and select the certificate issued by new-ca. Then the web login page of the Device appears. On the login page, type the username usera, and password 123 to enter the web management page.
How do I connect my HP switch to the console?
To connect a console to the switch, use the console cable shipped with the switch and connect a PC or VT-100 terminal to the console serial port. The PC or terminal then functions as a management console connected directly to the switch.
How do I find my Aruba access point IP address?
Viewing Access Point Details Tap any of the APs listed in the Inventory list. The Access Point Details page is displayed with details. View the AP details such as the AP name, IP address of the AP, MAC address, Serial number, AP type, radio, and the number of the clients connected on each radio channel.
How do I find the IP address of my HP switch?
A switch should have a web interface and a telnet interface. Another approach would be to use the arp command to find its IP address from the Mac address (which should be physically labeled on it somewhere).
How do I setup my HP ProCurve 2810?
Installing the switch
- Verify components shipped with the ProCurve 2810 Switch.
- Prepare the installation site.
- Verify that the switch passes self-test.
- Mount the switch and route the power cords.
- Connect power to the switch.
- Connect the network cables.
- (Optional) Connect a management console to the switch.