Can you fix my bike with no spark?
We plug and now has NO spark. removed kill switch, no spark. Installed new CDI and now has spark. roadtest and it runs. Let run for a few mins to clean out the excessive fuel. Called it a day. Next day, will not start. good spark. wet plug. let still, no start, wet plug again.
What should I do if my bike won’t start?
Key position is at 1 o:clock at TDC. Back together and still wont start. Has spark but now firing through the side of the stock plug boot. removed boot, cut wire back 1/4″ reinstall new boot, good spark again. Engine still will not start and has wet plug.
Why is my spark plug wet on my bike?
New carb flooded engine so bad that fuel was pouring out of the muffler and off the rear engine mount. Installed 3rd new carb, still wet plug. Let sit overnight, fresh NGK plug and still can not get to run.
Why does my motorcycle not start with a cracked spark plug?
When a cracked spark plug is installed, the spark will find the least path of resistance through the crack and ground out to your engine block instead of going all the way down to the end of the spark plug and jumping across the gap like it’s supposed to.
Its a newer bike so that probably wouldn’t affect the spark plugs much. But you could test them by taking one out and holding it against the metal of your engine and try to start it. If you see a spark, they should be good.
What to do if your dirt bike has no spark?
To fix a dirt bike with no spark, you must remove the spark plug from the cylinder block, put it back in the ignition coil, and kick start the bike to check for the spark. If there is no spark, replace the plug with a new one and double-check all the electric components and repeat the process.
Why does my Kawasaki KX 125 not start?
Compression, Fuel, Spark – NO START! Ok.. I am having trouble with my 1993 Kawasaki KX 125. It has fuel, plenty of spark, and also good compression. Kick it many times and every now and then it will start.. run for about 3 seconds revving up with the throttle, then it won’t respond to the throttle anymore and completely die out.
Why does my two stroke bike not start?
The clue you don’t want to find is that the float bowl has no fuel in it. That means you can stop in your tracks and remove the carb from the bike, Once you have the carb removed, follow these basic steps: (1) Make sure the floats move and the needle-and-seat move freely.
What to do when your engine has no spark?
Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. Finally, Have someone crank the engine and watch for spark. Remove one of the coils from the spark plug. Use an extra spark plug. A spark plug tester. Or even a screwdriver in the end of the coil.
What does it mean when your motorcycle spark plug is not working?
If you like to ride motorcycles, there is a very good chance that sooner or later you will experience a “No Spark” situation. The scope of this article will focus on visual observations, the use of a multimeter or bulb tester, and the appropriate process of elimination to determine why your motorcycle spark plug (s) is not firing correctly.
We plug and now has NO spark. removed kill switch, no spark. Installed new CDI and now has spark. roadtest and it runs. Let run for a few mins to clean out the excessive fuel. Called it a day. Next day, will not start. good spark. wet plug. let still, no start, wet plug again.
If you like to ride motorcycles, there is a very good chance that sooner or later you will experience a “No Spark” situation. The scope of this article will focus on visual observations, the use of a multimeter or bulb tester, and the appropriate process of elimination to determine why your motorcycle spark plug (s) is not firing correctly.
What to do when your dirt bike won’t start?
Turn the bike over by kicking it, or with the electric starter, and you should see the plug sparking. If there’s no spark then the first thing to do is to try a new spark plug. If the new plug sparks, put it back in and try starting the engine. If it doesn’t spark you could have a more serious problem.
What should I do if there is no spark at the ignition switch?
Then, have someone bump the ignition switch or kick starter while you observe the plug’s ground electrode. If you see a blue or yellow spark bridge the gap, then you should have adequate fire to ignite the fuel/air mixture in that cylinder. If not: 2) Be certain the motorcycle is turned on. That sounds simple but ignition switches can fail.