Can I just fill up my coolant?
You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water. When the coolant rises to the cold fill line, replace the cap and tighten it until you feel it click.
How do you completely fill coolant?
Slowly fill the radiator or coolant tank with fresh coolant until the coolant is 1 in. below the neck of the radiator or a few inches below the full mark on the coolant tank. Start the engine and let it run. After the engine warms, you’ll see the coolant level quickly drop in the radiator/coolant tank.
What kind of coolant does a 1999 Toyota Sienna take?
Antifreeze/Coolant Prestone 1 Gallon Yellow Concentrate Coolant/Antifreeze.
How to remove coolant from Toyota Sienna engine?
DRAIN ENGINE COOLANT (a) Loosen the radiator drain cock plug. HINT: Collect the coolant in a container and dispose of it according to the regulations in your area. (b) Remove the radiator cap sub-assembly from the radiator assembly. NOTICE: Do not remove the radiator cap sub-assembly while the engine and radiator are still hot.
What to do if your Toyota Sienna overheats?
If the coolant temperature gauge indicates an excessive temperature, turn off the engine and let it cool. If there is not enough coolant, the engine may overheat or be seriously damaged.
Can you use water as a substitute for coolant?
Contact your TOYOTA dealer for further details. Never use water as a substitute for engine coolant. (h) Slowly pour coolant into the radiator reservoir tank until it reaches the FULL line. (i) Squeeze the No. 1 and No. 2 radiator hoses several times by hand, and then check the level of the coolant.
How to install a Toyota Sienna brake actuator?
1. INSTALL BRAKE ACTUATOR NOTICE: Do not remove the hole plugs before connecting the brake tubes. New actuators are filled with brake fluid. (a) Install the brake actuator assembly with the 2 nuts. Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 2.