How long do shocks last on Jeep Grand Cherokee?
Struts and shocks may need to be replaced anywhere between 50k and 100k miles. If at any time the struts or shocks are leaking, broken, or damaged, they should be replaced immediately.
When should I replace shocks on my SUV?
Generally, shocks and struts wear out every 50,000-100,000 miles. If you’re a more aggressive driver and/or frequently drive on rough roads, they will wear out faster. Shocks and struts don’t go out all at once; they deteriorate slowly over time.
How many shocks does a 1998 Jeep Cherokee have?
When these shocks go bad, you may experience a harsh ride, loud noises or an uneven ride. The 1998 Jeep Cherokee has four shocks: one on each corner, directly behind the wheel and tire.
Where are the shocks on a Jeep Cherokee?
The 1998 Jeep Cherokee has four shocks: one on each corner, directly behind the wheel and tire. Shocks are large cylinders about 12 inches in length that connect between the wheel assembly and the chassis of the vehicle.
When is it time to replace my shock absorbers?
Most shocks deteriorate internally over time without any visual outward signs, so it’s sometimes difficult to notice because the effects build up so gradually. Worn shock absorbers. The most important thing to remember is that shocks primarily lose their ability to control weight transfer as they wear.
How can I tell if my shocks are bad?
A classic way to test for badly worn shocks is to push down on each corner of a parked vehicle. Shocks that are okay will cause the vehicle to bounce back up initially, then stop shortly thereafter. With worn shocks, the vehicle will continue bouncing for a bit.
How often should shocks be replaced on a Jeep Grand Cherokee?
by Jared Curtis. Shocks should be replaced on your Jeep Grand Cherokee every 75,000 miles to maintain a high quality ride. Shocks mount from the frame of the vehicle to the axle and absorb any bumps from the road.
Where are the shocks on a 1998 Jeep Cherokee?
On a 1998 Jeep Cherokee, the shocks are relatively easy to repair with a few tools. Lift the hood of the vehicle and locate the upper locking nut. It will be on the vehicle’s inner fender well attached to the upper shock stud. Loosen and remove the locking nut from the upper shock stud on both sides of the vehicle, using a wrench.
How do you remove a shock from a car?
Jack up the rear of the vehicle and support it with jack stands. Loosen and remove the lower shock bolt. This is where the shock meets the large beam that runs the width of the vehicle. Loosen and remove the two upper mounting bolts from the shock using a ratchet, socket and extension.