Why does my Jeep gauges go crazy with the key off?

JUST NOTICED THAT WITH KEY OFF IF YOU HIT THE WINDSHIELD WIPERS THAT GAUGES WILL MOVE. JEEP DEALERSHIP CAN’T FIGURE IT OUT AND NEITHER CAN MY MECHANIC. MECHANIC THINKS ITS A ELECTRIC PROBLEM? WHAT ABOUT IGNITION? OBVIOUSLY THERE MUST BE SOME JUICE GETTING TO GAUGES WITH KEY OFF. ALSO, JEEP IS IN WON’T START MODE NOW.

Why does my 2002 Jeep Grand Cherokee not start?

SOMETIMES VEHICLE (2002 JEEP GRAND CHEROKEE) WON’T START. YOU GET NOTHING WHEN YOU HIT THE KEY, NO CLICKING, NO NOTHING. YOU MAY GO BACK LATER AND IT WILL START. GAUGES GO CRAZY. WILL COME ON. ODOMETER AND CLOCK WILL FLASH. SOMETIMES SPEEDOMETER WILL GO FROM 60 TO ZERO AND BACK. WILL NOT LOSE POWER THOUGH.

Why are all the gauges shooting up and down?

All gauges in dashboard shooting up/down like crazy and all indicator lights turn on! Yesterday my wife complained that the gauges on the dashboard are suddenly shooting up and down like crazy, and also all the indicator lights, abs, coolant, door indicators, etc. light up when this happens.

What to do when your gauges go crazy?

Retouch them with a soldering iron even if you can’t see cracks. They can be tiny. One way to detect them is to smack the dash above the cluster next time they go crazy. If they straighten up then get the soldering iron out.

Why does my Jeep WK start with no click?

This seams to be a common problem with the wk but i was always told that if it clicks its the battery or corrosion on a connection on the battery from a loose wire or corrosion. When a starter goes bad the starter wont click at all it should be completely dead with no clicking.

What does it mean when your gauges go crazy?

YOU MAY GO BACK LATER AND IT WILL START. GAUGES GO CRAZY. WILL COME ON. ODOMETER AND CLOCK WILL FLASH. SOMETIMES SPEEDOMETER WILL GO FROM 60 TO ZERO AND BACK. WILL NOT LOSE POWER THOUGH. YOU CAN HAVE KEY OFF AND SOMETIMES GAUGES WILL TWITCH.

Why does my Jeep make a clicking sound when I start it?

It sounds like you are hearing the starter solenoid clicking. If you get one click from the engine compartment when turning the key to the start position that’s sign that the starter drive gear has hit the flywheel but the starter motor itself isn’t running to crank the engine.

What should I do if my Jeep won’t start?

Jeep won’t start. battery ok (power to lights, console and jeep won’t start. battery ok (power to lights, console and radio. When ignition turned on, hear only a slicking sound.

When does the check gauge light come on?

The Check Gauges light will only come on after it’s hit third gear and has been running in it for a least 10 seconds. I tested this for about 5 minutes riding around my neighborhood in 1st and 2nd trying to keep it under 3rd. Once I hit the main streets, the light came on within 10-15 seconds. I tried this twice.

What should my battery gauge be at with engine off?

The battery is putting out plenty of volts on it’s own with engine off. Before the light comes on and the gauge falls to 0, my battery gauge hovers at 12; meaning, the needle will move to just before or just after the 12V hash line intermittently

Why is the instrument cluster on my Jeep Cherokee not working?

Checked the fuses, as well as the hot to the cluster from the fuse and back to the battery. Next plan is the grounds and then the connectors. Not liking this instrument panel

Why do the lights go off on my Jeep Grand Cherokee?

The symptom is that the all the lights and gauges on the dash cluster go on and off erratically and sometimes stay off for a few minutes. This also includes the A/C system. As the gauges go off so does the A/C fan. I have taken the Jeep to the dealer now going on 5 or more times and quite frankly, they are stumped.

Is there an electrical problem with my Grand Cherokee?

I have been experiencing random electrical problems. The symptom is that the all the lights and gauges on the dash cluster go on and off erratically and sometimes stay off for a few minutes. This also includes the A/C system. As the gauges go off so does the A/C fan.

Is there a problem with my Jeep Grand Cherokee?

Very often, this will solve the problem. But Jeep Grand Cherokees seem especially prone to more serious transmission problems, and some owners are quite vexed at their inability to determine the causes.

When to reset the Immobilizer on a Jeep Grand Cherokee?

The system is activated when something other than an authorized key is used to try to start the engine. Most models are also equipped with an alarm system as part of the security system. If something triggers the immobilizer or the alarm system, you need to reset and rearm the system.

How can I tell if my Jeep Grand Cherokee is shifting?

Turn ignition key ON and OFF three times, finally leaving the key in the ON position. Leave the Overdrive Off Switch in the normal overdrive (ON) position. Immediately begin counting the number of flashes displayed by the Overdrive Off Switch indicator lamp. There will be two sets of flashes, separated by a pause.

Why does my Jeep Wrangler not start up?

However, if your fuel gauge shows that the tank is full, there may be a problem with signal transmission. Then you should just be looking into the tank. Or, the fuel filter is clogged so that fuel cannot be pumped to the engine properly.

What does it mean when your car won’t start?

ALSO, JEEP IS IN WON’T START MODE NOW. I NOTICED WHEN HITTING KEY AND TRYING TO START I GET NOTHING….NO LIGHTS, BELLS, OR WHISTLES. YET IF I SHIFT JEEP INTO NEUTRAL, CAR WON’T START, BUT THE GAUGES ON DASH LIGHT UP, AND BELL GOES OFF???

What kind of battery does a Jeep Wrangler have?

I have a 92 wrangler 4.0 6cyl with 5 speed, 200,000 miles on it and it just died. I have no electrical, wont turn over, no lights. If I put on the hazard I can hear the relay click but no lights. The parking brake light on the dash lights up but VERY faint. -New battery…nothing, still worn turn over, no power.

The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698. All of them have to do with the PCM not communicating with the instrument cluster.

Why are all the lights on my Jeep Cherokee not working?

The lights work (cel, seatbelt light, air bag, etc) but the actual gauges don’t work. Any ideas of where I should check? All the grounds seem to be connected, and I haven’t made any changes with wiring in regard to the cluster.

My jeep won’t start. It will turn over, but won’t fire. The gauges and lights all come on, but show nothing. Shows I’m Have Jeep questions? Ask a Jeep repair expert for answers By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. My jeep wont start.

What kind of Jeep Wrangler wont turn over?

Enter your ride HERE to be a part of MAY’s Ride of the Month Challenge! I have a 92 wrangler 4.0 6cyl with 5 speed, 200,000 miles on it and it just died. I have no electrical, wont turn over, no lights.

How does the fuel gauge on a jeep work?

The fuel gauge on your Jeep is powered by the fuel sensor relay. If the fuel gauge in your Jeep stops working, the relay has gone bad and needs to be replaced. The fuel sensor relay is responsible for powering the sensors that, in turn, relay information to your fuel gauge.

What to do if your Jeep Cherokee stops running?

If the Jeep Cherokee has stopped running or will not start and you feel that the fuel pump has failed, then this is the proper way of diagnosing the problem before replacing an item that may not be needed. Starting from the basics, take off the fuel cap and listen closely for the fuel pump to come on as a helper turns on the ignition key.

How to test fuel pump in Jeep Cherokee?

Use a circuit tester and test the harness side for power as your helper turns the key on and off. Remember that there will be power for only 2 seconds, so have your helper cycle the key on and off as you check the terminals, allowing 5 seconds between cycling for the computer to reset.

Why does my Jeep stall when I start the engine?

If it starts, the fuel pump is the problem. If not, the engine should be checked for spark. It could be a sensor or computer-related problem. To be absolutely sure, raise and support the back of the Jeep on jack stands, unless the height allows you to crawl under the back without raising it.

Who is the guy who troubleshoots the fuel gauge?

He has owned an auto service facility since 1982 and has over 45 years of technical experience as a master ASE tech. Bowman has a business degree from Pennsylvania State University and was an officer in the U.S. Army (aircraft maintenance officer, pilot, six Air Medal awards, two tours Vietnam). How to Troubleshoot the Fuel Systems of

What to do if your Jeep Grand Cherokee won’t start?

When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Grand Cherokee, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it.

What does the temperature gauge mean on a Jeep Grand Cherokee?

You could be having an overheating problem (Temperature gauge near or in the red) You could be having a charging system problem (Battery or Amp gauge reading in the “discharge” or “low voltage” area.)

How to know if your Jeep Grand Cherokee is out of fuel?

You could be nearly out of fuel (Fuel gauge reading near empty) Your oil pressure could be low (OIl Pressure gauge reading very low)….You have to look at your gauges to find out what is going on that is not normal. You can’t post conmments that contain an email address.

What should I do if my gas gauge is not working?

Note that some self-test steps may stop the gas gauge at 1/4, 1/2, and 3/4, as well. Fuel sender test. The fuel sender test should be conducted when the tank is lower than HALF, to prevent fuel splashing. Start by making sure the plug is clean, dry, and free of corrosion. Make sure the pins are straight and that the connector is fully seated.

Is there a problem with my Jeep Grand Cherokee dashboard?

The contact owns a 2009 Jeep Grand Cherokee. While driving 25 mph, the electronic dashboard failed without warning. The vehicle was taken to a dealer where it could not be diagnosed. The failure recurred on several occasions. The manufacturer was not made aware of the failure.

What kind of problem does a 2005 Jeep Grand Cherokee have?

Tl-the contact owns a 2005 Jeep Grand Cherokee. The contact stated while driving 70 mph, the dash panel started flashing and the gauges went out and the vehicle stopped. The vehicle started and the contact was able to get home. The contact stated that the ignition switch went out.

Why is my Jeep skim key not working?

For $100, they will reprogram your existing Jeep ECM engine computer to “delete” or “bypass” the KEY AND SKIM MODULE which is the main cause for the jeep shutting down after start up. The security feature is good when it works. But Chrysler didn’t do a good job ensuring the SKIM didn’t go bad. So your key-skim-ecm begin to not behave.

What to do if your Jeep won’t start?

With the key in the “start” position, if the starter motor is getting power but the starter doesn’t work, then the starter is condemned and replaced. Note that starters can and do sometimes develop intermittent faults due to bad spots on the armature.

What does it mean when your Jeep doesn’t start?

YET IF I SHIFT JEEP INTO NEUTRAL, CAR WON’T START, BUT THE GAUGES ON DASH LIGHT UP, AND BELL GOES OFF??? I KNOW NOTHING MECHANICAL SO I DON’T KNOW WHAT ANY OF THIS MEANS, BUT THOSE THAT SHOULD KNOW SEEM TO BE HAVING TROUBLE ALSO. THANK YOU Clicking this will make more experts see the question and we will remind you when it gets answered.

What kind of Lights does a Jeep Grand Cherokee have?

All the lights (Check engine, transmission, abs, auto traction, etc, etc, etc) in my 2006 Jeep Grand Cherokee 4.7 Laredo’s instrument panel suddenly went on and off twice while driving (First time ever)…. And then the auto traction light as well as the ESP/BAS lights stayed on…

Why does my Jeep Grand Cherokee stall while driving?

My 2004 Jeep Grand Cherokee just started stalling while driving this week. It would stall while driving and then it wouldn’t crank at all. I thought it was bad gas so I added Sea Foam and it started right up. But, that after a few minutes it died again.

What to do if your Jeep Cherokee turns off while driving?

Try changing the throttle position sensor located on the throttle body. Pull throttle body off 4 bolts disconnect the 3 wires clean throttle body with throttle body spray or carb spray. Spray the other sensor clean to a shine. My jeep was doing same thing no more problems.

Checked the fuses, as well as the hot to the cluster from the fuse and back to the battery. Next plan is the grounds and then the connectors. Not liking this instrument panel

Why does my Jeep Grand Cherokee engine stop?

THE ENGINE WILL STOP WITHOUT WARNING, GAUGES DON’T REGISTER BUT THE ENGINE WILL CRANK OVER WITHOUT STARTING. THIS HAS HAPPENED NUMEROUS TIMES. I DISCOVERED IT INITIALLY AT A DEALER PARKING LOT. IT CLEARED OVERNIGHT AND I COULD START IT.

What to do if your Jeep Grand Cherokee shuts down?

MY SON LATER REMOVED THE PCM RELAY AND REINSERTED THE RELAY. IT NOW HAPPENS QUITE OFTEN AND SOMETIMES REQUIRES CAR TO BE LEFT FOR A FEW HOURS OR OVERNIGHT. THIS BECOMES DANGEROUS IF ON THE FREEWAY.

What should the pressure be while running a jeep?

:thumbsup:. We pulled the jeep in and tried to start back up, the engine would run for about 20-30 seconds then slowly sputter and die again. We were stumped. We tested full pressure at the rail, Jeep states that while engine running should maintain 31 psi while running (For a 92 XJ).

What does it mean when a jeep dies?

Right before i got to work the Engine started to sputter and backfire through the exhaust and intake :brickwall::brick wall: Luckily I broke down about a mile away from my shop :thumbsup:. We pulled the jeep in and tried to start back up, the engine would run for about 20-30 seconds then slowly sputter and die again. We were stumped.

Why does my Jeep Grand Cherokee not work?

All gauges do not work ( work briefly if i press on the brake) I sent my Jeep to a mechanic I had problems my gauges did not work and he said it could be a coil spring or ignition. He serviced my vehicle and changed the ignition. That did not fix the problem but the items listed above do not work. He did

Why are the gauges on my Dodge Ram not working?

The interior lights come on the radio comes on but the gauges themselves do not work. I hate to say it but it your ECM might be bad. Check your fuses, relays, and wiring. If none of those work, hook up a diagnostic and see if there’s any codes that you can see to fix it before my assumption. 8 people found this helpful.

How does the cooling fan work on a Jeep Grand Cherokee?

The cooling fan in a Jeep Grand Cherokee keeps engine temperatures at the correct level by kicking on during times when the engine reaches higher-than-average temperatures. Without it, the engine can reach dangerous temperatures and damage engine components.

Is there a problem with my 2000 Jeep Grand Cherokee?

No one has added a helpful site for this 2000 Grand Cherokee problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: Search CarComplaints.com for these popular complaint phrases…

What happens when the speedometer on a Jeep Grand Cherokee stops working?

One of the most inconvenient things that can happen to your Grand Cherokee is when the speedometer stops working. You don’t really realize how much you look at the thing until it’s just always sitting at 0 MPH while driving down the road.

What is the ECU on a Jeep Grand Cherokee?

ECU – Your Grand Cherokee’s Engine Control Unit (ECU for short) is the computer that takes all of the information that the vehicle sensors compile and uses it to control the vehicle systems, and sends important vehicular telemetry data to the driver via the instrument cluster.

When did the Jeep Grand Cherokee come out?

The Jeep Grand Cherokee was redesigned for the 1999 model year; the 2000 models have minimal changes. This model is also known as Jeep WJ. Answered! View the answer I have this problem too Is this a good question? you may want to also consider that your battery has a dead cell and that no amount of charging is going to save that .

What are the problems with the Jeep Grand Cherokee?

“No CCD/J1850 messages received from the electronic transmission control module (EATX) or the Asian transmission controller)” P1686 – No SKIM BUS Messages Received. “No CCD/J1850 messages received from the Smart Key Immobilizer Module (SKIM)” The smart key system seems to be the issue.

What are the problems with the iginition key on a jeep?

If the iginition key is turned to ACC, all the gauges work. It is when the Jeep is started lights will light up and gauges go dead. I took the Jeep to the Local Auto Zone to be tested and it reported the SKIM MODULE needed replaced.

Why does my Jeep Grand Cherokee stall out?

About two days ago I was out in the mountains and got back to my car from a hike and she would start, run for about two seconds and then stall out from what seemed to be a lack of fuel. All of my gauges were flat dead.

How to check for a no start Jeep?

Check for corrosion. If good, use a digital voltmeter to test for power in the main relay socket. With the key turned to the RUN position, check for battery power on two terminals and ground on one terminal in the socket.

How does the ignition switch work on a late model Jeep?

The ignition switch on late model cars doesn’t actually switch power to the starter, ignition or fuel system. The switch acts only as a signal to the PCM/body control module. When you turn the key, the PCM/BCM anti-theft system determines whether you’re using the proper key.

What to do if your Jeep Wrangler won’t start?

Troubleshooting Jeep TJ Wrangler! Won’t Start but Problem Found – Project 2004 If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Why does my Jeep turn over but does not start?

Cranks But Does Not Start Condition: In this type of condition, you turn the key and the engine in your Jeep cranks (turns over) but it doesn’t start (run). The usual suspects, that can cause this type of problem, are a bad fuel pump, bad crank sensor, bad ignition coil (if your Jeep is distributor equipped), etc.

What to do if your Jeep Wrangler battery won’t start?

The first starting point when diagnosing a dead battery is to verify your battery has the correct voltage. Incorrect or low power to the starter will not start your Jeep. Batteries use CCA (Cold Cranking Amps) to measure starting power.

What happens when your gas gauge is not working?

The gas gauge tells you how much fuel is in your gas tank and alerts you when it’s time to refuel. If your gas gauge is not working, the inaccurate information it provides may cause you to run out of gas unexpectedly.

Why does my speedometer go off when I jump start my car?

A common problem for this malfunction is when the car owner recently replaced the battery, or perhaps jump-stared their vehicle, which in both cases could have caused an electrical spike that made the speedometer go berserk. See the simple reset solution in the video below, demonstrated on a 2002 Chrysler Sebring.

What to do if the OBD II scanner doesn’t communicate with the vehicle?

What to do if the OBD II scanner doesn’t communicate with the vehicle. TEST 1: Connect the positive DMM lead to DLC pin 4 and the negative DMM lead to the negative battery terminal, using jumper wires if necessary. Do not connect to the body or chassis ground but to the battery terminal directly.

Is it safe to get power from OBD 2 port?

This terminal must be connected directly (i.e., unswitched) to the DC Positive of the vehicle’s battery. This connection does not preclude the use of a fuse or other circuit protection elements. This circuit may be grouped with other similar circuits. This terminal must be able to supply a minimum of 4.0 A.

Is it safe to use an OBD for a dash cam?

Most dash cams don’t have a large enough battery to record while the vehicle is off so most people recommend using an external power bank. However, to my understanding, most power banks with enough capacity for that purpose are not safe enough to leave in the car. Another option is to use an OBD to mini USB power adapter like this.

Why does my car make a clicking noise when I start it?

Because the starter is not getting enough electricity to stay powered and crank the engine, the system’s repeated attempts make a clicking sound. Follow these steps toward a resolution: Try jump-starting the car. If it starts, then dies, you might have an issue with the alternator.

Navigation