How big is the axle on an XJ Cherokee?
Stock XJ Cherokee Axle info: Stock axle splines: 27 (upgradeable to 30 splines) Lug Pattern: 5 on 4.5″ Width: 60″ from wheel mounting surface to wheel mounting surface Notes: This was not the most desirable axle due to the vaccume disconnect which was prone to failure.
What’s the weak part of the ZJ Grand Cherokee axle?
Many people upgrade this axle with 30 spline axles and lockers. The upgrade many times is known as a SUPER 35 kit. The weak part of this axle is the axle tubes. Under extreme pressure they flex which results in broken axles or pinion failures. Stock ZJ Grand Cherokee Axle info: Lug Pattern: 5 on 4.5″ Notes: Stronger the earlier D30’s.
How to extend Front and rear axle breather tubes?
Here I explain how to extend and relocate your Jeep Wranglers front and rear differential breather tubes using a 5/16″ (7.9mm) rubber fuel hose and your stock axle vents. This cheap and easy modification is a must if you plan on crossing any water. This is exactly the same for all 2007-2018 Jeep Wranglers along with many other 4×4 vehicles.
Is the XJ / ZJ / WJ axle a bad axle?
Many people upgrade this axle with 30 spline axles and lockers. The upgrade many times is known as a SUPER 35 kit. The weak part of this axle is the axle tubes. Under extreme pressure they flex which results in broken axles or pinion failures. Lug Pattern: 5 on 4.5″ Notes: Stronger the earlier D30’s. Not a bad axle with 33″ or smaller tires.
How to remove the front axle on a Jeep Cherokee?
Locate the lower mounting bolts for the front shock absorbers on the axle near the base of the coil springs. Remove the bolts with a wrench and leave the shocks sitting in place. The upper mounts will retain them to the body when the axle is removed. Locate and remove the banjo screw that attaches the brake calipers to the rubber brake hose.
Where can I get crankcase breather hose for my Jeep Cherokee?
Your Jeep Cherokee will be happy to know that the search for the right Crankcase Breather Hose products you’ve been looking for is over! Advance Auto Parts has 7 different Crankcase Breather Hose for your vehicle, ready for shipping or in-store pick up.
Where are the shock absorbers located on a Jeep Cherokee?
Locate and remove the four retaining bolts where the front drive shaft meets the axle. Use a 10 mm wrench to loosen the bolts and slide the shaft out of the axle yoke, setting it out of the way. Locate the lower mounting bolts for the front shock absorbers on the axle near the base of the coil springs.
Where can I get a new axle for my Jeep?
Replacement axles can be purchased new from a Jeep dealer, but buying a used axle from a salvage yard or auto parts recycling center can save you a large amount of money. Loosen the lug nuts on the front wheels of your Jeep with a lug wrench.