How to install an aftermarket radio in a jeep?
Step 6: Installing the New Radio. To install your aftermarket radio into your Jeep, start by taking the A/M-F/M radio antenna adapter, and plugging it firmly into the factory A/M-F/M radio antenna.
How to add a sub woofer to a jeep stereo?
1 Interface with the factory radio (3 ways) 2 Connect the amplifiers power wire with the vehicles battery 3 Connect the amplifiers remote power wire to a positive lead that is triggered when the vehicle is started or radio is turned on 4 Connect the amplifiers ground wire 5 Connect the amplifier to the sub woofer (s)
How to upgrade 2014 Jeep Grand Cherokee head unit audio?
2014 Jeep Grand Cherokee radio removal and installation: 1.Use a pry tool,prize lower button controls to release and remove it. Use a pry tool,prize lower button controls to release and remove it. 2.Disconnect cables behind it,you can use a tool help you if it is very tight,remove button controls and put is aside.
How do you install an aftermarket car stereo?
Installing the Aftermarket Stereo Connect the new aftermarket wiring harness adapter. Connect the new radio’s plug to the wiring harness adapter. Connect the aftermarket stereo. Slide the new stereo into the dash. Test the aftermarket stereo. Troubleshoot the stereo installation.
Step 6: Installing the New Radio. To install your aftermarket radio into your Jeep, start by taking the A/M-F/M radio antenna adapter, and plugging it firmly into the factory A/M-F/M radio antenna.
What kind of radio does a Jeep Grand Cherokee have?
About a year and a half ago, I purchased my first car: a 2002 Jeep Grand Cherokee. From the factory, it included an A/M-F/M radio with both a cassette and a CD player, which is fine for most people, but if you’re like me, you probably are envious of your friends who have newer vehicles with more tech features.
How to connect a factory radio to an aftermarket radio?
Set the factory radio aside. Connect the factory wiring harness adapter’s wires to the wires on the wiring harness that came with your new radio in the following order, using electrical tape each time to secure each set of wires together: Connect the negative (-) right rear speaker wires together (purple w/ black stripe).
How do you install a lighting system on a Jeep Cherokee?
Secure the plastic mounting adapter kit to your Jeep’s dashboard with the two (2) bolts you removed earlier. Reinstall the instrument cluster and center stack surround bezel and hold it in place with the Philips-head screws you removed earlier. Reinstall the vehicle lighting control panel Philips-head screw.