What kind of coolant does a Jaguar use?
Fill the cooling system up to the MAX mark on the coolant expansion tank using a fifty percent mixture of Jaguar Premium Cooling System Fluid or equivalent, meeting Jaguar specification WSS M97B44-D and fifty percent water. Do not over tighten the coolant expansion tank bleed screw.
How to drain the jagrepair Jaguar cooling system?
Disconnect the auxillary coolant flow pump electrical connector. Remove the dual coolant flow valve: 1.) Remove the retaining bolt. 2.) Remove the dual coolant flow valve. Remove the dual coolant flow valve hoses. To install, reverse the removal procedure.Tighten to 10 Nm.
Where does the refrigerant go in a Jaguar?
Let’s follow the refrigerant’s path, once it leaves the compressor: CONDENSOR – This is the thin radiator in front of your engine’s radiator. At this point, the refrigerant is extremely hot and under high pressure–80 to 300 psi, depending on the environmental conditions.
Why does my Jaguar air conditioner need to be removed?
Any moisture in the system will freeze up at the expansion valve and will clog the system, so it has to be removed. Then, it’s back to the compressor, and the cycle starts over. Remember, anyone can perform mechanical work on an A/C system without a license, but no one is allowed to vent any refrigerant into the atmosphere.
How to drain coolant from the Jaguar cooling system?
Fill the cooling system up to the MAX mark on the coolant expansion tank using a fifty percent mixture of Jaguar Premium Cooling System Fluid or equivalent, meeting Jaguar specification WSS M97B44-D and fifty percent water. Install the coolant expansion tank bleed screw.Tighten to 3 Nm.Do not over tighten the coolant expansion tank bleed screw.
When to remove coolant reservoir filler cap on Jaguar?
Never remove the coolant reservoir filler cap when the engine is hot. Escaping steam or scalding water could cause serious personal injury. Unscrew the filler cap slowly, allowing the pressure to escape before removing completely. Antifreeze is highly flammable.
What should I do if I spill antifreeze on my Jaguar?
Soak up any spillage with an absorbent cloth immediately. Wash the area with a mixture of car shampoo and water. Do not use any anti-leak products in the cooling system, as it causes damage to the vehicle. Antifreeze contains important corrosion inhibitors.
What’s the specific gravity of antifreeze on a Jaguar?
Failure to do so may cause corrosion of the radiator and engine components. The specific gravity of a 50% antifreeze solution at 68°F (20°C) is 1.068 and protects against frost down to -40°F (-40°C). Rotate the coolant reservoir filler cap counter-clockwise and remove.