What to do if you get a message on your Jaguar dash?
The air suspension system is too low. Start the engine and wait for the message to clear before driving the vehicle. If the message is displayed while you are driving, restrict your speed until the message is cleared. If the message is persistently shown, inform your Jaguar Dealer. The driver’s and/or one or more passenger doors are open.
How are the warning lights displayed on a Jaguar?
If a warning message is displayed along with a red warning light (highest priority), investigate the fault immediately. If more than one message is active, each is displayed in turn for two seconds in order of priority. Displayed when the brake fluid level is low. Depending on your location, warning light may be displayed in red letters BRAKE.
Why is my wash / wipe not working on my Jaguar?
If wash/wipe is selected when this message is displayed (even if it has been cleared from the message centre), the programmed wipe after washing will not operate. This is to avoid smearing the windscreen if the reservoir is empty. Top up the washer fluid at the earliest opportunity. The fuel filler cap may be loose.
When to pull off the road in a Jaguar?
Pull off the road when safe to do so and allow the engine to cool. When cool, top up with coolant if required. This will be displayed when the vehicle has possible loss of power or driveability. Displayed when the engine has defaulted to limp home mode. The air suspension system is too low.
The air suspension system is too low. Start the engine and wait for the message to clear before driving the vehicle. If the message is displayed while you are driving, restrict your speed until the message is cleared. If the message is persistently shown, inform your Jaguar Dealer. The driver’s and/or one or more passenger doors are open.
Why does my Jaguar have a restricted performance error?
What is the Jaguar Restricted Performance error? With the Restricted Performance error message, the car is indicating that the engine management system has gone into a “limp” mode to protect certain systems and components. This changes depending on the system or components being protected.
When does the DSC light flash on a Jaguar?
Displayed when a fault occurs in the stability control system (Dynamic Stability Control). DSC light will flash when the program is operational and stabilising the vehicle. When the system is switched OFF manually, the warning light in the instrument cluster will be illuminated until the system is switched back ON.
Why does a Jaguar engine stop when Def runs out?
Jaguar’s latest diesel models produce exceptionally low exhaust emissions as a result of Diesel Exhaust Fluid (DEF), which is injected into the exhaust gases. If the DEF reservoir runs out completely, the car will stop rather than risk damaging the engine.
What is the Jaguar Restricted Performance error? With the Restricted Performance error message, the car is indicating that the engine management system has gone into a “limp” mode to protect certain systems and components. This changes depending on the system or components being protected.
Jaguar’s latest diesel models produce exceptionally low exhaust emissions as a result of Diesel Exhaust Fluid (DEF), which is injected into the exhaust gases. If the DEF reservoir runs out completely, the car will stop rather than risk damaging the engine.
What do the warning lights on a Jaguar mean?
The warning lamp illuminates red to warn the driver that the level of DEF is seriously low. It also comes on red if the incorrect fluid has been added to the system, or if there is a fault with the system. Follow the messages on the instrument panel, if safe to do so.
What to do if you get a red alert on a Jaguar?
If a red alert requires you to stop please seek help, either from a roadside assistance service or else from the network of Jaguar dealerships and service specialists. To book a Jaguar service, contact your local dealer today. BOOK A SERVICE
How to diagnose Pats on a 2002 Jaguar?
Action: Refer to the following information when diagnosing PATS on a 2002 MY-ON X-TYPE vehicle. DIAGNOSTIC FLOWCHAR TS · P1260 – Security input (Page 2) · Passive Anti-Theft System (To be used to interpret the type of failure) (Pages 3 and 4) PATS Customer fault code flowcharts.
If a warning message is displayed along with a red warning light (highest priority), investigate the fault immediately. If more than one message is active, each is displayed in turn for two seconds in order of priority. Displayed when the brake fluid level is low. Depending on your location, warning light may be displayed in red letters BRAKE.
Where is the hidden menu on the jaguar’s type?
Please try again later. In Jaguar S-Type you can access instrument cluster hidden menu to perform diagnostic tests, read DTC fault codes and check engine parameters.
Action: Refer to the following information when diagnosing PATS on a 2002 MY-ON X-TYPE vehicle. DIAGNOSTIC FLOWCHAR TS · P1260 – Security input (Page 2) · Passive Anti-Theft System (To be used to interpret the type of failure) (Pages 3 and 4) PATS Customer fault code flowcharts.
When to reset the clock on a Jaguar?
Refer to the audio systems handbook or touch-screen display handbook. • If the battery is disconnected for more than 72 hours the radio preset channels will need to be reset. • Reset the clock to the correct time.
What can I do with my Jaguar S-type?
In Jaguar S-Type you can access instrument cluster hidden menu to perform diagnostic tests, read DTC fault codes and check engine parameters. Perform needle sweep test, check indicators and LCD display, read fault codes, check live data like vehicle speed, engine RPMs, battery voltage, fuel flow, various temperature sensors and more.
What to do if your Jaguar XF has a restricted performance warning?
The XF and XJ have had quite a few, and Jaguar are aware of them. Recommended fix is to switch off the engine, lock the car, wait a couple of minutes and then restart. If this doesn’t work then check to make sure there is no damp on the carpets in the footwells and around the seats.
What is the diagnostic code for a Jaguar check engine light?
Refer to our Generic OBD II code list for definitions on all other Jaguar diagnostic trouble codes. Manufacturer Specific Codes P1000OBD Systems Readiness Test Not Complete P1104Mass Air Flow Sensor Circuit Ground – Read Our Article On Automotive Circuit TestingFor Help With This Jaguar Check Engine Light Code P1111System Pass
The XF and XJ have had quite a few, and Jaguar are aware of them. Recommended fix is to switch off the engine, lock the car, wait a couple of minutes and then restart. If this doesn’t work then check to make sure there is no damp on the carpets in the footwells and around the seats.
Are there any fault messages on the dash?
When I turned round to drive off noticed that every light on the dash was on and the computer was scrolling through fault messages e.g. Engine fault, gearbox fault, DSC not available, suspension fault, brake fluid low… and it just went on and on. But the car was running and driving fine. Turned it off and it wouldnt restart for a few minutes.
Why is my Jaguar not running on Def?
Follow the on-screen messages; your Jaguar will not run when the DEF reservoir has run dry. The lamp also illuminates if the incorrect fluid has been added to the system, or if there is a fault with the system. Stop as soon as you can and contact roadside assistance or a Jaguardealer. Engine Temperature
Why is the touch screen on my Jaguar not working?
Trouble is I cannot access anything such as the parking sensors, radio, satnav, A/C, blue tooth phone etc. The car is only 5 months old and covered less than 3k miles! The car drives perfectly otherwise.
Pull off the road when safe to do so and allow the engine to cool. When cool, top up with coolant if required. This will be displayed when the vehicle has possible loss of power or driveability. Displayed when the engine has defaulted to limp home mode. The air suspension system is too low.
What does the trouble code mean on a Jaguar S-type?
When the fault is fixed you can reset the trouble codes which will turn off the warning lights. Jaguar S-Type airbag warning light – if the airbag symbol is illuminated in your Jaguar S-Type it means the system has a malfunction and needs to be diagnosed.
What does the ABS warning light on a Jaguar mean?
Once the problem/fault has been fixed you can use the LR v1.0 kit to erase the trouble codes & the airbag light from the dashboard. Jaguar S-Type ABS warning light – if your ABS warning symbol is constantly illuminated on the instrument cluster of your Jaguar S-Type it indicates a fault within this system.
What does the transmission warning light on a Jaguar mean?
Jaguar S-Type powertrain transmission warning light – this transmission warning symbol (in automatic cars only) will illuminate if there is a fault in the system. To diagnose the fault we recommend using the iCarsoft LR V1.0 Jaguar OBD Code Reader. It will allow you to view diagnostic trouble codes & fault descriptions.
Why is my EPB not working on my Jaguar?
Called Jaguar Assistance, as I have extended warranty. Technician said it was because battery voltage was <12.5v when switching on (before starting). He downloaded a software patch, said it won’t happen again. Fingers crossed! Stuck on the car park at work the other day with the parking break problem.
What to do when your Jaguar says restricted performance?
First and foremost, always use an OBD scanner to run diagnostics when you get the Restricted Performance message. If you’re a “do-it-yourselfer” but don’t own a scanner, you can go to any local auto parts supply store and use theirs. If you prefer to take the car into a Jaguar specialized mechanic, they have a diagnostic scanner.