What Size is the oil drain plug on Hyundai Accent?
17mm
Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033.1)
What type of drain plug is used for Hyundai Kia applications?
Hyundai & Kia M14-1.5 Oil Drain Plug with Gasket.
What is the function drain plug?
A drain plug is a plug which is taken out to allow a fluid to be drained from a tank such as an engine oil pan or sump. Remove the oil drain plugand allow oil to drain out. Remove the drain plug under the engine with the wrench, and let the oil flow into the pan.
What is the plug in the sink called?
These are called stoppers, and they include a fitting that goes inside the drain and a lift rod to raise and lower the stopper valve. A pivot rod, spring clip, clevis strap and associated hardware are used to activate the mechanism.
What kind of oil does a Hyundai Accent use?
If your Accent is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Accent. Most Hyundais have the oil type printed on the oil cap – it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40.
How much transmission fluid does a Hyundai Accent have?
I have a 2013 Hyundai Accent with automatic transmission. When I went to change the oil I mistakenly removed the transmission plug and 2.5 liters came out. There is no dip stick and the capacity of the system is 7.3 liters. I took it to a local garage and they added 1 liter. I then took it to the dealer and they added almost 4 liters.
How do you change the drain plug on an oil pan?
Move the drain pan under the drain plug on the oil pan. Remove the drain plug with a wrench and allow the oil to drain for 10 minutes. Replace the oil drain plug by threading it on clockwise by hand. Tighten it with a wrench the rest of the way, but only until it is snug. The pan is thin and there are only two or three threads.