What are the three basic components of a strut assembly?
Strut assemblies consist of a coil spring to support the vehicle’s weight, a strut housing to provide rigid structural support for the assembly, and a strut cartridge within the strut housing and spring to control spring and suspension movement and make sure tires maintain contact with the road.
What are the parts of a MacPherson strut assembly?
A MacPherson strut assembly is made up of the strut, bumpstop or boot, spring, springseat, and mount. Some strut assemblies also include other parts such as a spring isolator or mount bearings. Here is a quick and easy visual of a typical strut assembly.
What do you need to know about upper strut mounts?
For those unfamiliar with the terminology, upper strut mounts will be the components installed on the top of your shock/spring combination that allows the suspension to be bolted to the top side of the wheel well. Upper strut mounts often will consist of several parts but essentially will hold the top of the strut assembly to the vehicle.
Where are the strut mounts on a linear spring?
The linear spring is most times uniform in shape and has equal distance between each spring coil: For those unfamiliar with the terminology, upper strut mounts will be the components installed on the top of your shock/spring combination that allows the suspension to be bolted to the top side of the wheel well.
What should be included with front strut top rubbers?
When purchasing the strut top rubbers, a metal sleeve should have been included with the rubber. This sleeve fits inside the rubber, and makes contact with the strut shaft, allowing the strut shaft to rotate freely inside the rubber.
Where are the shock mounts on a MacPherson strut?
A top strut mount connects the strut to the vehicle’s body or frame. Strut mount in a MacPherson strut. In many cars, you can see the front top strut mounts under the hood (see photo below). Shock absorber mounts serve the same purpose, scroll down to read more about them.
Where does the top strut mount go on a car?
A top strut mount connects the strut to the vehicle’s body or frame. Strut mount in a MacPherson strut. In many cars, you can see the front top strut mounts under the hood (see photo below).
Why is my front shock mount making noise?
Front strut mount. This type of noise could be caused by a metal plate separating from the rubber inside the mount, or by a worn-out strut bearing. It’s not always easy to diagnose a noisy strut mount because the damage is not visible from the outside.
When to replace a top shock mount on a car?
Top strut mounts and upper shock mounts: when to replace? In a car, a strut is a shock absorber that is built into an assembly with the coil spring and the top mount, called a strut mount, see the illustration. A top strut mount connects the strut to the vehicle’s body or frame. Strut mount in a MacPherson strut.